ITExamDump는Juniper JN0-343인증시험의 촉매제 같은 사이트입니다.Juniper JN0-343인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Juniper JN0-343인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Juniper JN0-343덤프자료가 많은 도움이 될 것입니다.
ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Juniper인증 JN0-343덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Juniper인증 JN0-343덤프는Juniper인증 JN0-343최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.
안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Juniper JN0-343인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Juniper JN0-343문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Juniper JN0-343인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
시험 번호/코드: JN0-343
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 393 문항
업데이트: 2013-09-09
ITExamDump의 Juniper인증 JN0-343덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Juniper인증 JN0-343덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.
JN0-343 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-343.html
NO.1 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper최신덤프 JN0-343 JN0-343 JN0-343 dumps JN0-343
NO.2 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 JN0-343 dumps
NO.3 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343 JN0-343 dumps JN0-343 pdf JN0-343 dump
NO.4 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper pdf JN0-343 JN0-343 pdf JN0-343 JN0-343
NO.5 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper pdf JN0-343 JN0-343 dump JN0-343기출문제 JN0-343 JN0-343
NO.6 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper JN0-343 JN0-343 JN0-343최신덤프 JN0-343
NO.7 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper JN0-343 pdf JN0-343자격증 JN0-343시험문제 JN0-343
NO.8 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper dumps JN0-343 pdf JN0-343 JN0-343자격증
NO.9 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper JN0-343시험문제 JN0-343 dump
NO.10 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper기출문제 JN0-343기출문제 JN0-343덤프 JN0-343인증 JN0-343
NO.11 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper기출문제 JN0-343 JN0-343
NO.12 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper인증 JN0-343최신덤프 JN0-343 JN0-343
NO.13 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343최신덤프 JN0-343 pdf JN0-343자격증
NO.14 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper dump JN0-343시험문제 JN0-343 JN0-343 JN0-343덤프
NO.15 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper최신덤프 JN0-343시험문제 JN0-343 JN0-343덤프
NO.16 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper인증 JN0-343 JN0-343 JN0-343 JN0-343
NO.17 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper JN0-343 JN0-343
NO.18 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343 dump JN0-343자료
NO.19 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper자격증 JN0-343시험문제 JN0-343시험문제
NO.20 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper JN0-343자료 JN0-343인증
NO.21 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 JN0-343인증 JN0-343 JN0-343
NO.22 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343자료 JN0-343 dumps JN0-343 JN0-343 JN0-343
NO.23 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343 JN0-343 dump JN0-343인증
NO.24 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343기출문제 JN0-343 JN0-343
NO.25 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper JN0-343 dumps JN0-343 dump JN0-343자격증
NO.26 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper자료 JN0-343 JN0-343인증 JN0-343기출문제
NO.27 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343자료 JN0-343 JN0-343
NO.28 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper시험문제 JN0-343기출문제 JN0-343 JN0-343 JN0-343 JN0-343 dumps
NO.29 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper JN0-343자료 JN0-343 JN0-343
NO.30 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper덤프 JN0-343 JN0-343 JN0-343 JN0-343자료 JN0-343최신덤프
ITexamdump의 000-273덤프의 VCE테스트프로그램과 646-048덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-465시험에 대비한 고품질 덤프와 MB7-702시험 최신버전덤프를 제공해드립니다. 최고품질 3103시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기