ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여IBM 000-605관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리IBM 000-605도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
IBM인증 000-605시험준비중이신 분들은IBM인증 000-605시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. IBM인증 000-605시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의IBM인증 000-605덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.
네트워크 전성기에 있는 지금 인터넷에서IBM 인증000-605시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여IBM 인증000-605시험을 한방에 통과하도록 도와드립니다.
ITExamDump는 여러분이 IBM인증000-605시험 패스와 추후사업에 모두 도움이 되겠습니다.ITExamDump제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. IBM인증000-605 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이IBM인증000-605시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump IBM인증000-605인증시험자료는 100% 패스보장을 드립니다
IBM 000-605인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만000-605시험은IBM인증의 아주 중요한 시험으로서000-605시험패스는 쉬운 것도 아닙니다.
현재IBM 000-605인증시험을 위하여 노력하고 있습니까? 빠르게IBM인증 000-605시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로IBM 000-605인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
시험 번호/코드: 000-605
시험 이름: IBM (IBM WebSphere Enterprise Service Bus V7.0,Integration Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 114 문항
업데이트: 2014-01-14
000-605 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-605.html
NO.1 Refer to the Exhibit.
The Assembly Diagram represents an existing StockQuote mediation module. The mediation module
must be enhanced to create a record in a billing system whenever a stock quote is executed. What must
be done to the Assembly Diagram to implement the enhancement?
A. Add a newBillingService import with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService import.
B. Add a newBillingService export with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService export.
C. Add a newBillingService import with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService import.
D. Add a newBillingService export with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService export.
Answer: A
IBM 000-605 000-605 dumps 000-605 dumps 000-605자격증
NO.2 An integration developer is developing a mediation flow component to integrate PeopleSoft Enterprise.
The integration developer has identified WebSphere Adapter for PeopleSoft Enterprise for this integration.
Which technology specification is implemented by this adapter?
A. Java EE Connector Architecture (JCA)
B. Java EE Component Architecture (JCA)
C. Java EE Connectivity Architecture (JCA)
D. Java EE Communication Architecture (JCA)
Answer: A
IBM시험문제 000-605 000-605 000-605
NO.3 A new version of a common business object currently defined in a shared library is required for a new
mediation module. Which of the following should be done to ensure that older modules are not
immediately affected by the change and both versions of the business object are available to all modules?
A. Create the new version of the business object using a different name in the shared library.
B. Create the new version of the business object using the same name in the new mediation module
without modifying the shared library or the other mediation modules.
C. Create the new version of the business object using a different name in the new mediation module
without modifying the shared library or the other mediation modules.
D. Move the old version of the common business object to each existing dependent mediation module,
then create the new version of the business object in the new mediation module.
Answer: A
IBM 000-605 000-605 000-605
NO.4 An integration developer is designing an XML map that combines the firstName and lastName
elements of the source into a single fullName element in the target. In addition, the fullName element
must be formatted with the lastName first, followed by a comma and then the firstName.
Which transform type would be the most appropriate for this situation?
A. Move
B. Concat
C. Append
D. Assign
Answer: B
IBM인증 000-605기출문제 000-605 000-605시험문제 000-605 dumps
NO.5 An integration developer is implementing a custom mediation primitive. The primitive has 3 out
terminals configured, Terminal1, Terminal2, and Terminal3. In the custom code, the developer wants to
propagate the original service message object (smo) to Terminal2. How should the developer implement
this in the code?
A. out.Terminal2(smo);
B. Terminal2.fire(smo);
C. fire(smo,Terminal2);
D. fire.out(smo,Terminal2);
Answer: B
IBM 000-605최신덤프 000-605최신덤프 000-605
NO.6 An integration developer is developing a mediation module using the WebSphere Integration Developer.
The mediation module interacts with different databases, via the database lookup mediation primitive and
an Enterprise Information system (EIS) binding. It is expected that during the lifetime of this solution, the
databases connection details will change. The customer wants to avoid downtime of the applications as
much as possible. What is the BEST way for the integration developer to implement a solution so that
when database connection details change, downtime is minimized?
A. Update the details of the database connections,then deploy the updated EAR file.
B. Define the various database connection details asWebSphere Variables. When a change in the
connection details occurs, update the WebSphere Variables on the server and restart the server.
C. Define the various database connections used as JNDI names. When a change in the
connection details occurs, update the JNDI details on the server and restart the application.
D. Define a properties file for the application to load on startup. When a change in the connection details
occurs, update the details in the properties file and restart the application.
Answer: C
IBM 000-605 000-605 000-605 000-605자격증
NO.7 An integration developer has been tasked to develop a mediation module that integrates a legacy J2EE
application deployed on a remote server. The legacy application is exposed through an EJB facade and
the integration developer decides to use an EJB import. What is the most suitable approach to configure it?
The integration developer should:
A. add the corresponding EJB client project to the module dependencies and select the EJB local
interface for the import.
B. import the corresponding EJB client project into the workspace and select the EJB remote interface for
the import.
C. create a WSDL interface with the same operations as the EJB interface, select it as the import interface
and add the EJB JNDI Name in the binding section.
D. use the external service wizard to point to the EJB through its IIOP URL and the wizard
automatically creates the interface and the business objects for the import.
Answer: B
IBM덤프 000-605자료 000-605
NO.8 Refer to the Exhibits.
An integration developer needs to implement an application to manage the reception of resumes for a job
application. The application must allow the applicant to attach a photo in jpeg format. The integration
developer decides to create a mediation module exposed through a Web Service Export binding using
SOAP with Referenced Attachments to save the photo to a database and send the rest of the data to a
business process for further processing. Exhibit A shows the assembly diagram of the mediation module.
Exhibit B shows the interface of the Export component of the mediation module in the interface editor.
Which actions does the integration developer need to execute in the interface editor above, in order to
correctly configure the Web Service Export binding to handle SOAP with Referenced Attachments?
A. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to
'base64Binary'.A.Leave the binding style to 'document literal wrapped', change the 'attachment' input type
to 'base64Binary'.
B. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
C. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
D. Leave the binding style to 'document literal wrapped', change the 'attachment' input type to 'hexBinary',
add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
E. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary'.C.Change the binding style to 'document literal non wrapped', change the 'attachment' input
type to 'hexBinary'.
F. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
G. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
H. Change the binding style to 'document literal non wrapped', change the 'attachment' input type to
'hexBinary', add in the Property editor the binary content type field 'image/jpeg' for the 'attachment' input.
Answer: F,G,H
IBM 000-605 000-605 000-605 000-605
NO.9 A mediation module must be designed to participate in a transaction initiated by a client component.
Which of the following settings should be used by the integration developer to meet the transaction
requirements for the mediation module?
A. Set the Transaction qualifier to False and the Join transaction qualifier to True.
B. Set the Transaction qualifier to Global and the Join transaction qualifier to True.
C. Set the Transaction qualifier to Local and the Join transaction qualifier to False.
D. Set the Transaction qualifier to True and the Join transaction qualifier toTrue.
Answer: B
IBM 000-605 000-605
NO.10 An integration developer is developing a mediation flow and wants to stop the execution of a path in
the flow. The developer has to choose between a Stop and a Fail mediation primitive. Which of the
following is the correct option to consider while making a choice between the two?
A. A Stop primitive would stop the execution, throw an exception and may rollback global
transactions if configured; a Fail primitive would stop the execution and consume the message silently.
B. A Stop primitive would stop the execution and consume the message silently; a Fail primitive would
stop the execution, throw an exception and may rollback global transactions if configured.
C. A Stop primitive would stop the execution, throw an exception and consume the message; a
Fail primitive would stop the execution and may return the message to the downstream primitive through
its output terminal if configured.
D. A Stop primitive would stop the execution and may return the message to the downstream primitive
through its output terminal if configured; a Fail primitive would stop the execution, throw an exception and
may return the message to the downstream primitive through its output terminal if configured.
Answer: B
IBM덤프 000-605 pdf 000-605 000-605자료 000-605인증 000-605자료
NO.11 Two integration developers are working on the same mediation module using WebSphere Integration
Developer. The module code needs to be merged at the end of each day so that the developers start at
the same completion level next day. Which of the following options is the correct way to achieve this with
respect to the versioning support in WebSphere Integration Developer? The developers can:
A. continue working on their individual versions of the projects and user 'compare projects' feature at the
beginning of each day.
B. continue working on their individual versions of the projects and merge them using a source control tool
at the end of each day.
C. maintain multiple versions of the projects in their respective workspaces and use the 'merge projects'
feature at the end of each day.
D. maintain multiple versions of the projects in their respective workspaces and use the
'synchronize projects' feature at the end of each day.
Answer: B
IBM 000-605자료 000-605인증 000-605최신덤프
NO.12 A client wants to invoke a mediation module that contains a mediation flow. Which of the following
export bindings with Request-Response interface will ensure that the mediation flow is invoked
asynchronously with callback by the client?
A. HTTP
B. Web services (SOAP/JMS)
C. Web services (SOAP/HTTP)
D. WebSphere MQ or WebSphere MQ-JMS
Answer: D
IBM 000-605 000-605 dump
NO.13 A PurchaseOrder business object and a SalesOrder business object inherit from an abstract Order
business object. Both PurchaseOrder and SalesOrder objects require an orderDate property.
However, PurchaseOrder requires an orderType property that is not required by SalesOrder. What is the
BEST way to model the objects?
A. Define theorderDate property in the abstract Order
Define the orderType property in PurchaseOrder
B. Define theorderDate property in the abstract Order
Define the orderType property in the abstract Order
C. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in PurchaseOrder
D. Define theorderDate property in PurchaseOrder and SalesOrder
Define the orderType property in the abstract Order
Answer: A
IBM 000-605 000-605
NO.14 An integration developer is using serviceDeploy command to generate J2EE application EAR files
from SCA modules. The serviceDeploy command expects an input file in which of the following formats?
A. .gz
B. .jar
C. .rar
D. .tar
E. .zip
Answer: B,E
IBM인증 000-605 000-605기출문제 000-605 dumps 000-605최신덤프
NO.15 An integration developer wants to access a database table on a DB2 database installed on an AIX
system using a JDBC Adapter. Using the configuration wizard of the JDBC Outbound Adapter import, the
integration developer is prompted for JAR files. Which kind of JAR files are required?
A. AIX specific JAR files
B. JDBC standard JAR files
C. DB2 specific JAR files
D. DB2 and AIX specific JAR files
Answer: C
IBM자료 000-605 000-605 000-605
NO.16 An integration developer has developed a new mediation flow and wants to test it on a new embedded
server profile. How should the integration developer proceed in order to perform this testing as efficiently
as possible?
A. Build the EAR file inWebSphere Integration Developer, then deploy it via serviceDeploy on the server.
B. Build the EAR file inWebSphere Integration Developer, then deploy it via the server's administrative
console.
C. In WebSphere Integration Developer, in the Servers tab, add a new server and enter the connection
details of the server.
D. InWebSphere Integration Developer, import the server via File>Import>Server and enter the
connection details of the server.
Answer: C
IBM 000-605 000-605 000-605 000-605
NO.17 The integration developer has an existing mediation flow that was developed using WebSphere
Integration Developer V6.2. The developer would like to take advantage of functionality in new mediation
primitives of WebSphere Integration Developer V7.0 to enhance the mediation flow design. What should
the integration developer do to migrate project artifacts from WebSphere Integration Developer V6.2 to
WebSphere Integration Developer V7.0? From WebSphere Integration Developer V6.2, export the
artifacts:
A. into a JAR file.Import the JAR file into the WebSphere Integration Developer V7.0, which will
automatically migrate the project.
B. as an EAR file.Import the EAR file into WebSphere Integration Developer V7.0, which will automatically
migrate the project.
C. into a Project Interchange (PI) file. Import the PI file into WebSphere Integration Developer V7.0. Then
use the migration wizard to complete the process.
D. into an Eclipse Product.Import the Eclipse file into WebSphere Integration Developer V7.0. Then use
the migration wizard to complete the process.
Answer: C
IBM 000-605 000-605 000-605시험문제 000-605인증 000-605
NO.18 An integration developer is developing a mediation flow component using WebSphere Adapters. It is
observed that the events are being delivered by multiple threads on several channels simultaneously.
What type of event delivery mechanism is used?
A. Ordered
B. Unordered
C. Persistent
D. Non-persistent
Answer: B
IBM 000-605최신덤프 000-605기출문제 000-605 000-605
NO.19 An integration developer has deployed different versions of the same SCA module to a server using
administrative console. Which of the following statements is TRUE about any subsequently deployed
versions of the module?
A. Previous versions of the module are cached in memory.
B. Previous versions of the module are overwritten by the new version of the module.
C. A new version of the module replaces the last version of the module.
D. A new version of the module does not replace any previous versions of the module.
Answer: D
IBM dump 000-605 000-605
NO.20 An integration developer wants to make some of the properties of the mediation primitives configurable
at runtime. Which of the following properties can be promoted to be visible to be visible within the
Administrative Console (Integrated Solutions Console)?
A. 'Root' of Event Emitter
B. 'Handler' of Message Logger
C. 'Table name' of Database Lookup
D. 'Binding Type' of Endpoint Lookup
E. 'Invocation Style' of Service Invoke
Answer: C,D
IBM 000-605 dump 000-605자료 000-605 dumps 000-605
ITexamdump의 00M-620덤프의 VCE테스트프로그램과 1Z1-061덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-T01D시험에 대비한 고품질 덤프와 EN0-001시험 최신버전덤프를 제공해드립니다. 최고품질 000-540시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기