Microsoft 자격증 070-515 시험문제와 답

IT업계에 종사하시는 분들은 IT인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. ITExamDump에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. ITExamDump덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.

지금 같은 정보시대에, 많은 IT업체 등 사이트에Microsoft 070-515인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Microsoft 070-515자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.

IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Microsoft인증 070-515시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. ITExamDump의Microsoft인증 070-515덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고ITExamDump제품으로 한번 가보세요.

시험 번호/코드: 070-515

시험 이름: Microsoft (TS: Web Applications Development with Microsoft .NET Framework 4)

ITExamDump에서는 가장 최신이자 최고인Microsoft인증 070-515시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Microsoft인증 070-515덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Microsoft인증 070-515시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

ITExamDump 의 Microsoft인증 070-515덤프는Microsoft인증 070-515시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Microsoft인증 070-515시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Microsoft인증 070-515시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.

070-515 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-515.html

NO.1 You create a new ASP.NET MVC 2 Web application. The following default routes are created in the
Global.asax.vb file. (Line numbers are included for reference only.)
01 Shared Sub RegisterRoutes(ByVal routes As RouteCollection)
02
03 routes.IgnoreRoute("{resource}.axd/{*pathInfo}")
04
05 routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "Index", .id = ""}
)
06 End Sub
You implement a controller named HomeController that includes methods with the following signatures.
Function Index() As ActionResult
Function Details(ByVal id As Integer) As ActionResult
Function DetailsByUsername(
ByVal username As String) As ActionResult
You need to add a route to meet the following requirements.
The details for a user must be displayed when a user name is entered as the path by invoking the
DetailsByUsername action.
User names can contain alphanumeric characters and underscores, and can be between 3 and 20
characters long.
What should you do?
A. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "DetailsByUsername",
.id = ""}
)
B. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{username}",
New With {.controller = "Home", .action = "DetailsByUsername",
.username = ""},
New With {.username = "\w{3,20}"}
)
C. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{username}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.username = "\w{3,20}"}
)
D. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{id}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.id = "\w{3,20}"}
)
Answer: C

Microsoft   070-515시험문제   070-515   070-515덤프   070-515

NO.2 You are implementing an ASP.NET application that includes a page named TestPage.aspx.
TestPage.aspx uses a master page named TestMaster.master.
You add the following code to the TestPage.aspx code-behind file to read a TestMaster.master public
property named CityName.
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
Dim s As String = Master.CityName
End Sub
You need to ensure that TestPage.aspx can access the CityName property. What should you do?
A. Add the following directive to TestPage.aspx.
<%@ MasterType VirtualPath="~/TestMaster.master" %>
B. Add the following directive to TestPage.aspx.
<%@ PreviousPageType VirtualPath="~/TestMaster.master" %>
C. Set the Strict attribute in the @ Master directive of the TestMaster.master page to true.
D. Set the Explicit attribute in the @ Master directive of the TestMaster.master page to true.
Answer: A

Microsoft   070-515자료   070-515

NO.3 You are implementing an ASP.NET MVC 2 Web application that contains the following class.
Public Class DepartmentController
Inherits Controller
Shared departments As List(Of Department) =
New List(Of Department)
Function Index() As ActionResult
Return View(departments)
End Function
Function Details(ByVal id As Integer) As ActionResult
Return View(departments.Find(Function(x) x.ID = id))
End Function
Function ListEmployees(ByVal d As Department) As ActionResult
Dim employees As List(Of Employee) = GetEmployees(d)
Return View (employees)
End Function
End Class
You create a strongly typed view that displays details for a Department instance. You want the view to also
include a listing of department employees.
You need to write a code segment that will call the ListEmployees action method and output the results in
place.
Which code segment should you use?
A. <%= Html.Action("ListEmployees", Model) %>
B. <%= Html.ActionLink("ListEmployees", "Department",
"DepartmentController") %>
C. <% Html.RenderPartial("ListEmployees", Model) %>
D. <%= Html.DisplayForModel("ListEmployees") %>
Answer: A

Microsoft   070-515 dump   070-515덤프   070-515

NO.4 You are troubleshooting an ASP.NET Web application. System administrators have recently expanded
your web farm from one to two servers. Users are periodically reporting an error message about invalid
view state. You need to fix the problem.
What should you do?
A. Set viewStateEncryptionMode to Auto in web.config on both servers.
B. Set the machineKey in machine.config to the same value on both servers.
C. Change the session state mode to SQLServer on both servers and ensure both servers use the same
connection string.
D. Override the SavePageStateToPersistenceMedium and LoadPageStateFromPersistenceMedium
methods in the page base class to serialize the view state to a local web server file.
Answer: B

Microsoft인증   070-515 dump   070-515 dumps

NO.5 You are implementing an ASP.NET MVC 2 application. In the Areas folder, you add a subfolder named
Product to create a single project areA.
You add files named ProductController.vb and Index.aspx to the appropriate subfolders.
You then add a file named Route.vb to the Product folder that contains the following code. (Line numbers
are included for reference only.)
01 Public Class Route
Inherits AreaRegistration
02
03 Public Overrides ReadOnly Property AreaName As String
04 Get
05 Return "product"
06 End Get
07 End Property
08
09 Public Overrides Sub RegisterArea(
ByVal context As AreaRegistrationContext)
10
11 context.MapRoute("product_default",
"product/{controller}/{action}/{id}",
New With {.controller = "Product", .action = "Index",
.id = ""})
12
13 End Sub
End Class
When you load the URL http://<applicationname>/product, you discover that the correct page is not
returned.
You need to ensure that the correct page is returned.
What should you do?
A. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}/{controller}/{action}/{id}",
New With {.area = "product", .controller = "Product",
.action = "Index", .id = ""})
B. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}",
New With {.controller = "Product", .action = "Index", .id = ""})
C. Add the following code segment at line 12.
AreaRegistration.RegisterAllAreas()
D. Add the following code segment to the RegisterRoutes method in the Global.asax.vb file.
AreaRegistration.RegisterAllAreas()
Answer: A

Microsoft pdf   070-515덤프   070-515   070-515 dumps   070-515덤프

NO.6 You are developing an ASP.NET Web application.
Application data is stored in a Microsoft SQL Server 2008 database. You configure a connection string
named cnnContoso. The application must cache the data that is returned from the database by using this
connection string.
You need to ensure that the application checks the database every 10 seconds.
What should you do?
A. Add the following configuration to the <system.web> section of the web.config file.
<caching>
<outputCacheSettings>
<outputCacheProfiles>
<add name="cnnContoso"
duration="10" />
</outputCacheProfiles>
</outputCacheSettings>
</caching>
B. Add the following configuration to the <system.web> section of the web.config file.
<caching>
<sqlCacheDependency enabled="true" pollTime="10000">
<databases>
<add name="ContosoDatabase"
connectionStringName="cnnContoso" />
</databases>
</sqlCacheDependency>
</caching>
C. Add the following @ Page directive to pages that query the database.
<%@ OutputCache Duration="10"
VaryByParam="cnnContoso" %>
D. Add the following @ Page directive to pages that query the database.
<%@ OutputCache Duration="10000"
VaryByParam="cnnContoso" %>
Answer: B

Microsoft기출문제   070-515   070-515덤프   070-515자격증   070-515   070-515

NO.7 You have created an ASP.NET server control named Shopping Cart for use by other developers. Some
developers report that the Shopping Cart control does not function properly with ViewState disabled. You
want to ensure that all instances of the Shopping Cart control work even if View State is disabled.
What should you do.?
A. Require developers to set EnableViewStateMac to true.
B. Store state in ControlState instead of ViewState.
C. Serialize the state into an Application state entry called "MyControl".
D. Require developers to change the session state mode to SQLServer.
Answer: B

Microsoft자격증   070-515덤프   070-515   070-515   070-515

NO.8 You are creating an ASP.NET Web site. You create a HTTP module named Custom Module, and you
register the module in the web.config file. The Custom Module class contains the following code.
Public Class Custom Module
Implements IHttpModule
Dim footerContent As String = "<div>Footer Content</div>"
Public Sub Dispose() Implements IHttpModule.Dispose
End Sub
End Class
You need to add code to CustomModule to append the footer content to each processed ASP.NET page.
Which code segment should you use?
A. Public Sub New(ByVal app As HttpApplication)
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
B. Public Sub Init(ByVal app As HttpApplication) _
Implements IHttpModule.Init
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = New HttpApplication()
app.Response.Write(footerContent)
End Sub
C. Public Sub New()
Dim app As HttpApplication = New HttpApplication()
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
D. Public Sub Init(ByVal app As HttpApplication) _
Implements IHttpModule.Init
AddHandler app.EndRequest, AddressOf app_EndRequest
End Sub
Sub app_EndRequest(ByVal sender As Object, ByVal e As EventArgs)
Dim app As HttpApplication = TryCast(sender, HttpApplication)
app.Response.Write(footerContent)
End Sub
Answer: D

Microsoft   070-515 dumps   070-515   070-515

NO.9 You are implementing an ASP.NET Web application. Users will authenticate to the application with an
ID. The application will allow new users to register for an account. The application will generate an ID for
the user based on the users full name. You need to implement this registration functionality.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Configure the SqlMembershipProvider in the web.config file.
B. Configure the SqlProfileProvider in the web.config file.
C. Create an ASP.NET page that contains a default CreateUserWizard control to create a new user
account.
D. Create an ASP.NET page that contains a custom form that collects the user information and then uses
the Membership.CreateUser method to create a new user account.
Answer: A, D

Microsoft기출문제   070-515   070-515 dump   070-515   070-515

NO.10 You are implementing an ASP. NET MVC 2 Web application. You add a controller named Company
Controller.
You need to modify the application to handle the URL path /company/info.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following method to the CompanyController class.
Function Info () As ActionResult
Return View()
End Function
B. Add the following method to the CompanyController class.
Function Company_Info() As ActionResult
Return View()
End Function
C. Right-click the Views folder, and select View from the Add submenu to create the view for the action.
D. Right-click inside the action method in the CompanyController class, and select Add View to create a
view for the action.
Answer: A, D

Microsoft기출문제   070-515   070-515 dump   070-515시험문제   070-515 pdf

NO.11 You are developing an ASP.NET MVC 2 Web application. The application contains a controller named
Home Controller, which has an action named Index. The application also contains a separate area named
Blog. A view within the Blog area must contain an Action Link that will link to the Index action of the Home
Controller. You need to ensure that the Action Link in the Blog area links to the Index action of the
HomeController.
Which Action Link should you use?
A. Html.ActionLink("Home", "Index", "Home")
B. Html.ActionLink("Home", "Index", "Home", New With {.area = ""}, Nothing)
C. Html.ActionLink("Home", "Index", "Home", New With {.area = "Blog"}, Nothing)
D. Html.ActionLink("Home", "Index", "Home", New With {.area = "Home"}, Nothing)
Answer: B

Microsoft최신덤프   070-515 dumps   070-515기출문제   070-515   070-515

NO.12 You create an ASP.NET page named TestPage.aspx that contains validation controls. You need to verify
that all input values submitted by the user have been validated by testing the Page.IsValid property.
Which page event should you add an event handler to?
A. Init
B. Load
C. PreInit
D. PreLoad
Answer: B

Microsoft   070-515   070-515 dump   070-515 dump

NO.13 You are implementing an ASP.NET MVC 2 Web application that contains several folders.
The Views/Shared/DisplayTemplates folder contains a templated helper named Score.ascx that performs
custom formatting of integer values.
The Models folder contains a class named Player with the following definition.
Public Class Player
Public Property Name As String
Public Property LastScore As Integer
Public Property HighScore As Integer
End Class
You need to ensure that the custom formatting is applied to LastScore values when the
HtmlHelper.DisplayForModel method is called for any view in the application that has a model of type
Player.
What should you do?
A. Rename Score.ascx to LastScore.ascx.
B. Move Score.ascx from the Views/Shared/DisplayTemplates folder to the
Views/Player/DisplayTemplates folder.
C. Add the following attribute to the LastScore property.
<UIHint("Score")>
D. Add the following attribute to the LastScore property.
<Display(Name:="LastScore", ShortName:="Score")>
Answer: C

Microsoft자격증   070-515 dump   070-515

NO.14 You are implementing an ASP.NET application that uses data-bound GridView controls in multiple
pages. You add JavaScript code to periodically update specific types of data items in these GridView
controls.
You need to ensure that the JavaScript code can locate the HTML elements created for each row in these
GridView controls, without needing to be changed if the controls are moved from one page to another.
What should you do?
A. Replace the GridView control with a ListView control.
B. Set the ClientIDMode attribute to Predictable in the web.config file.
C. Set the ClientIDRowSuffix attribute of each unique GridView control to a different value.
D. Set the @ OutputCache directives VaryByControl attribute to the ID of the GridView control.
Answer: B

Microsoft   070-515   070-515

NO.15 You are developing an ASP.NET Web page that contains input controls, validation controls, and a button
named btnSubmit.
The page has the following code-behind. (Line numbers are included for reference only.)
01 Public Class _Default
02 Inherits System.Web.UI.Page
03
04 Protected Sub SaveToDatabase()
05
06 End Sub
07
08 Protected Sub btnSubmit_Click(ByVal sender As Object,
09 ByVal e As EventArgs) Handles btnSubmit.Click
10
11 End Sub
12
13 End Class
You need to ensure that all data that is submitted passes validation before the data is saved in a
database.
What should you do?
A. Add the following method override.
Protected Overrides Sub OnInit(ByVal e As EventArgs)
MyBase.OnInit(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
B. Add the following method override.
Protected Overrides Sub OnLoad(ByVal e As EventArgs)
MyBase.OnLoad(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
C. Add the following method override.
Protected Overrides Sub OnPreRender(ByVal e As EventArgs)
MyBase.OnPreRender(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
D. Add the following code segment at line 10.
If (Page.IsValid) Then Me.SaveToDatabase()
Answer: D

Microsoft   070-515   070-515최신덤프

NO.16 You are implementing an ASP.NET Web site. The root directory of the site contains a page named
Error.aspx. You need to display the Error.aspx page if an unhandled error occurs on any page within the
site. You also must ensure that the original URL in the browser is not changed.
What should you do?
A. Add the following configuration to the web.config file.
<system.web>
<customErrors mode="On">
<error statusCode="500" redirect="~/Error.aspx" />
</customErrors>
</system.web
B. Add the following configuration to the web.config file.
<system.web>
<customErrors redirectMode="ResponseRewrite"
mode="On" defaultRedirect="~/Error.aspx" />
</system.web>
C. Add the following code segment to the Global.asax file.
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
Response.Redirect("~/Error.aspx")
End Sub
D. Add the following code segment to the Global.asax file.
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
Server.Transfer("~/Error.aspx")
End Sub
Answer: B

Microsoft   070-515   070-515   070-515 dump   070-515

NO.17 You are implementing an ASP.NET Web site that will be accessed by an international audience. The site
contains global and local resources for display elements that must be translated into the language that is
selected by the user. You need to ensure that the Label control named lblCompany displays text in the
users selected language from the global resource file. Which control markup should you use?
A. <asp:Label ID="lblCompany" runat="server"
meta:resourcekey="lblCompany" />
B. <asp:Label ID="lblCompany" runat="server"
Text="meta:lblCompany.Text" />
C. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:lblCompanyText %>" />
D. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:WebResources, lblCompanyText %>" />
Answer: D

Microsoft   070-515인증   070-515덤프

NO.18 .You are developing an ASP.NET MVC 2 Web application. A page makes an AJAX request and
expects a list of company names in the following format. ["Adventure Works","Contoso"] You need to write
an action method that returns the response in the correct format.
Which type should you return from the action method?
A. AjaxHelper
B. XDocument
C. JsonResult
D. DataContractJsonSerializer
Answer: C

Microsoft dump   070-515 dump   070-515 pdf

NO.19 You are creating an ASP.NET Web site. The site has a master page named Custom.master. The
code-behind file for Custom.master contains the following code segment.
Partial Public Class Custom
Inherits System.Web.UI.MasterPage
Public Property Region As String
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
End Sub
End Class
You create a new ASP.NET page and specify Custom.master as its master page.
You add a Label control named lblRegion to the new page.
You need to display the value of the master pages Region property in lblRegion.
What should you do?
A. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Parent
lblRegion.Text = custom.Region
B. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Master
lblRegion.Text = custom.Region
C. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Page.FindControl("lblRegion")
lblRegion.Text = Me.Region
D. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Master.FindControl("lblRegion")
lblRegion.Text = Me.Region
Answer: B

Microsoft   070-515 pdf   070-515 dumps   070-515

NO.20 You are developing an ASP.NET Web application. You create a master page. The master page requires
a region where you can add page-specific content by using the ASP.NET page designer.
You need to add a control to the master page to define the region.
Which control should you add?
A. Content
B. ContentPlaceHolder
C. PlaceHolder
D. Substitution
Answer: B

Microsoft자격증   070-515 dump   070-515   070-515

It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이Microsoft 070-515를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.Microsoft 070-515은 그만큼 아주 어려운 시험입니다. 그래도Microsoft 070-515인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.