JN0-660인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의JN0-660인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에JN0-660인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.
IT업계에 종사하고 계시나요? 최근 유행하는Juniper인증 JN0-660 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Juniper인증 JN0-660덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Juniper인증 JN0-660덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
시험 번호/코드: JN0-660
시험 이름: Juniper (Service Provider Routing and Switching, Professional)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 171 문항
업데이트: 2013-09-09
인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. Juniper 인증JN0-660인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의Juniper 인증JN0-660로 시험을 한방에 정복하세요.
ITExamDump의 Juniper인증 JN0-660덤프를 공부하여Juniper인증 JN0-660시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Juniper인증 JN0-660덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.
JN0-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-660.html
NO.1 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-660최신덤프 JN0-660시험문제 JN0-660 JN0-660자격증 JN0-660
NO.2 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C
Juniper JN0-660 JN0-660
NO.3 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D
Juniper JN0-660 JN0-660 JN0-660
NO.4 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B
Juniper자격증 JN0-660 pdf JN0-660 JN0-660덤프 JN0-660 pdf JN0-660
NO.5 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D
Juniper덤프 JN0-660 JN0-660자격증 JN0-660
NO.6 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B
Juniper최신덤프 JN0-660 pdf JN0-660 JN0-660
NO.7 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A
Juniper dumps JN0-660인증 JN0-660 JN0-660자료
NO.8 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C
Juniper JN0-660 JN0-660자료
NO.9 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C
Juniper JN0-660 dump JN0-660자료 JN0-660 JN0-660 JN0-660
NO.10 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C
Juniper JN0-660인증 JN0-660자격증 JN0-660 dumps JN0-660 dumps
NO.11 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D
Juniper최신덤프 JN0-660기출문제 JN0-660 JN0-660 pdf JN0-660자료 JN0-660
NO.12 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B
Juniper자료 JN0-660 JN0-660시험문제 JN0-660
NO.13 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C
Juniper자격증 JN0-660 JN0-660 JN0-660덤프 JN0-660기출문제
NO.14 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B
Juniper인증 JN0-660 JN0-660 dump JN0-660자료
NO.15 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C
Juniper dump JN0-660 JN0-660시험문제 JN0-660 JN0-660시험문제
NO.16 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D
Juniper최신덤프 JN0-660시험문제 JN0-660최신덤프 JN0-660
NO.17 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C
Juniper dump JN0-660 JN0-660 JN0-660
NO.18 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D
Juniper JN0-660최신덤프 JN0-660자격증 JN0-660
NO.19 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D
Juniper시험문제 JN0-660 JN0-660 dump JN0-660 JN0-660 pdf
NO.20 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A
Juniper시험문제 JN0-660 JN0-660덤프 JN0-660자격증 JN0-660 JN0-660
ITexamdump의 C_TSCM62_65덤프의 VCE테스트프로그램과 BCP-340덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB3-701시험에 대비한 고품질 덤프와 JN0-380시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-593시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기