Microsoft 인증 70-667 덤프

ITExamDump의Microsoft인증 70-667시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Microsoft인증 70-667시험대비덤프를 제공해드립니다.

Microsoft인증 70-667시험을 어떻게 패스할가 고민그만하고ITExamDump의Microsoft 인증70-667시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.

시험 번호/코드: 70-667
시험 이름: Microsoft (TS: Microsoft SharePoint Server 2010, Configuring )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 197 문항
업데이트: 2013-10-30

ITExamDump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. ITExamDump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Microsoft 70-667자격증을 취득하실 수 있습니다.지금 바로 사이트에서Microsoft 70-667덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증70-667시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

Microsoft인증 70-667시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Microsoft인증 70-667시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Microsoft인증 70-667덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.

ITExamDump전문가들은Microsoft 70-667인증시험만을 위한 특별학습가이드를 만들었습니다.Microsoft 70-667인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Microsoft 70-667인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

ITExamDump사이트에서 제공하는Microsoft 인증70-667 덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump의 를Microsoft 인증70-667 덤프공부자료를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험 덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다. ITExamDump제품으로 자격증을 정복합시다!

70-667 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-667.html

NO.1 Your company network includes a SharePoint Server 2010 Service Pack 1 (SP1) server.
A sandbox solution repeatedly fails.
You need to prevent the solution from running. You also need to ensure that the resolution affects no other
sandboxed solutions in the site collection.
What should you do.?
A. From the Site Collection Quotas and Locks page, raise the resource quota that is applied to the site
collection
B. From Microsoft SQL Server Management Studio, set the status of the site collection content database
to read-only.
C. From the SharePoint 2010 Management Shell, run the Remove-SPUserSolution PowerShell cmdlet.
D. From Central Administration, add the solution as a Blocked Solution on the Sandboxed Solution
Management page.
Answer: D

Microsoft인증   70-667인증   70-667

NO.2 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to ensure that users
can receive SMS alert notifications.
What should you configure?
A. the Service Application Associations settings from Central Administration
B. the Send To Connections settings from Central Administration
C. the mobileControls settings in the web.config file
D. the Mobile Account settings from Central Administration
Answer: D

Microsoft   70-667기출문제   70-667자격증   70-667인증

NO.3 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains a site
collection named Intranet.
You upload a custom solution to the Solution Gallery of Intranet. You discover that you cannot activate the
custom solution. You need to ensure that you can activate the solution in Intranet.
What should you do?
A. From Central Administration, start the Application Registry Service.
B. From Windows PowerShell, run Start-Service -Name SPUserCodeV4.
C. From Central Administration, create a new service application.
D. From Central Administration, start the Microsoft SharePoint Foundation Sandboxed Code Service.
E. From a command prompt, run stsadm.exe -o execadmsvcjobs
F. From Windows PowerShell, run Start-Service -Name SPAdminV4
G. From Central Administration, activate the Global Web Parts feature.
H. From Windows PowerShell, run New-SPAccessServiceApplication -Name SandboxSolution
Confirm:$true.
Answer: B

Microsoft기출문제   70-667 dump   70-667   70-667

NO.4 You configure a SharePoint 2010 farm.
You need to gather data from existing logs on critical events only.
What should you do?
A. Run the following Windows PowerShell cmdlet:
Set-SPLogLevel -EventSeverity ErrorCritical
Get-SPLogLevel
B. Run the following Windows PowerShell cmdlet:
Get-SPLogEvent | Out-GridView
C. Run the following Windows PowerShell cmdlet:
Get-SPLogLevel -Identity "Cricial Issues"
D. Use the SharePoint Health Analyzer feature.
Answer: A

Microsoft dump   70-667최신덤프   70-667   70-667   70-667

NO.5 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm.
The List View Threshold property is set to 7,500.
You need to ensure that developers can retrieve a maximum of 7,500 items from a list.
What should you do?
A. Create an information management policy.
B. Enable HTTP request throttling
C. Modify the Allow Object Model Override setting.
D. Modify the value of the List View Lookup Threshold
Answer: C

Microsoft dump   70-667   70-667최신덤프   70-667자격증

NO.6 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You configure the User Profile
Synchronization Service to use a new user account as a service account. You discover that user profiles
are not imported from Active Directory. You verify that the service is running, and then you run the
Forefront Identity Manager service. You receive the following error message: "Replication Access is
Denied." You need to ensure that the user profiles are imported from Active Directory. Which permissions
should you assign to which service account?
A. the Replication synchronization permission to the service account of the User Profile Synchronization
Service
B. the Replication synchronization permission to the service account of the farm
C. the Replicating Directory Changes permission to the service account of the farm
D. the Replicating Directory Changes permission to the service account of the User Profile
Synchronization Service
Answer: D

Microsoft dump   70-667자격증   70-667 pdf

NO.7 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains a web
application named WebApp1. WebApp1 contains one site collection named Portal.
WebApp1 is configured to use NTLM authentication.
You need to implement forms-based authentication for Portal. What should you do? (Each correct answer
part of the solution. Choose all that apply.)
A. Modify the Client.config file.
B. Modify the Web.config file.
C. Create a managed metadata service connection.
D. Extend WebApp1.
E. Create a new web application.
Answer: BD

Microsoft pdf   70-667기출문제   70-667   70-667   70-667최신덤프

NO.8 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains two web
applications named WebApp1 and WebApp2.
WebApp1 contains one site collection. The site collection contains 300 sites.
WebApp2 is used to host personal sites.
You need to prevent the site collection in WebApp1 from containing more than 100 GB of data. Which
Windows PowerShell cmdlet should you use?( Note: This quesiton is part of a series of questions that use
the same set of answer choices. Each answer choice may be used once, more than once, or not at all.)
A. Set-SPUsageService
B. Set-SPTimerJob
C. Enable-SPTimerJob
D. New-SPWebApplication
E. Set-SPDiagnosticConfig
F. Enable-SPHealthAnalysisRule
G. Remove-SPUsageApplication
H. Set-SPAlternateURL
I. New-SPWebApplicationExtension
J. Set-SPSite
K. Set-SPWeb
L. Set-SPContentDatabase
M. Set-SPLogLevel
N. Install-SPApplicationContent
Answer: J

Microsoft자료   70-667   70-667자격증   70-667   70-667

NO.9 applications named WebApp1 and WebApp2. WebApp1 contains one site collection. The site collection
contains 300 sites. WebApp2 is used to host personal sites. You need to ensure that trace logs are
deleted automatically two days after the logs are created. Which Windows PowerShell cmdlet should you
use?( Note: This quesiton is part of a series of questions that use the same set of answer choices. Each
answer choice may be used once, more than once, or not at all.)
A. Set-SPContentDatabase
B. Set-SPUsageService
C. Set-SPSite
D. Set-SPDiagnosticConfig
E. Install-SPApplicationContent
F. Set-SPWeb
G. Set-SPAlternateURL
H. Set-SPTimerJob
I. Enable-SPHealthAnalysisRule
J. New-SPWebApplication
K. Enable-SPTimerJob
L. Set-SPLogLevel
M. New-SPWebApplicationExtension
N. Remove-SPUsageApplication
Answer: D

Microsoft   70-667   70-667덤프   70-667자료   70-667덤프

NO.10 Your company network includes a SharePoint Server 2010 Service Pack 1 (SP1) server. You create an
http://www.contoso.com web application that has multiple site collections. The site collections have a
large amount of content residing across lists. You deploy custom web parts that query the list items
through the SharePoint object model. You need to ensure that the custom code that queries the list items
and default list views remains within 2,500 items for each request.
What should you do?
A. Set the value of List View Threshold to 2500. Set the value of Object Model Override to No.
B. Set the value of List View Lookup Threshold to 2500. Set the value of Object Model Override to No.
C. Set the value of HTTP Request Monitoring and Throttling to No. Set the value of Daily Time Windows
for Large Queries to 0 hours.
D. Set the value of the PropertySize attribute to 2500 on the WebPartLimits node in the web.config file.
Answer: A

Microsoft dumps   70-667 pdf   70-667

NO.11 Your network contains two servers named Server1 and Server2 that run Microsoft SQL Server. All of
the databases on Server1 are mirrored to Server2. You have a SharePoint Server 2010 Service Pack 1
(SP1) server farm that is configured to use Server1 as the database server for all of the databases.
You need to ensure that users can access all SharePoint sites if Server1 fails.
What should you configure?
A. the Business Data Connectivity service application
B. a failover server for each SharePoint database
C. a failover server for each service applicaiton
D. a failover server for each content database
Answer: B

Microsoft   70-667최신덤프   70-667

NO.12 You have a Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2) server farm. You upgrade
the server farm to SharePoint Server 2010 Server Pack 1 (SP1). You open a SharePoint site and discover
that you cannot select the Visual Upgrade option. You need to ensure that you can perform a visual
upgrade of the SharePoint site.
What should you do?
A. Run stsadm.exe and specify the preupgradecheck operation
B. Run the upgrade-spcontentdatabase cmdlet.
C. Run psconfig.exe and specify the -cmd parameter.
D. Run stsadm.exe and specify the setproperty operation.
Answer: B

Microsoft   70-667기출문제   70-667   70-667 dumps

NO.13 You are piloting the deployment of a SharePoint Server 2010 Service Pack 1 (SP1) server farm named
Farm1. Farm1 contains two front-end Web servers and an application server. You create a new site
collection that contains five sites. You need to simulate 200 user connections to the sites. The solution
must use the minimum amount of administrative effort.
Which tool should use?
A. Stsadm
B. Microsoft SharePoint Designer
C. Test-Connection
D. Microsoft Visual Studio
Answer: D

Microsoft자료   70-667기출문제   70-667자료   70-667

NO.14 You configure a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You have a site collection
named http://www.contoso.com based on the Team Site template that has anonymous access enabled.
You need to ensure that anonymous users cannot view application-level pages.
What should you do?
A. From the SharePoint 2010 Management Shell, run the following cmdlet:
Disable-SPFeatureDocumentSet -Url "http://www.contoso.com"
B. Add User1 to the Site Owners group.
C. From the SharePoint 2010 Management Shell, run the following cmdlet:
Disable-SPFeatureViewFormPagesLockdown -Url "http://www.contoso.com"
D. From the SharePoint 2010 Management Shell, run the following cmdlet:
Enable-SPFeatureViewFormPagesLockdown -Url http://www.contoso.com
E. From the SharePoint 2010 Management Shell, run the following script:
$spWeb = Get-SPWeb "http://www.contoso.com/sales" $spWeb.BreakRoleInheritance($false)
$spWeb.Dispose( )
F. From the SharePoint 2010 Management Shell, run the following script:
$spWeb = Get-SPWeb "http://www.contoso.com/sales" $spWeb.BreakRoleInheritance($true)
$spWeb.Dispose( )
G. Add User1 as a site collection administrator.
H. GrantDesign permissions to the Sales SharePoint user group.
Answer: D

Microsoft기출문제   70-667시험문제   70-667   70-667   70-667시험문제

NO.15 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to ensure that a user
can create Excell Services service applications. The solution must minimize the number of permissions
assigned to the user.
What should you do?
A. Add a new managed account to the server farm.
B. Modify the Farm Administrators group.
C. Modify the service accounts of the server farm.
D. Modify the administrators of the Excel Services service application.
Answer: B

Microsoft   70-667   70-667

NO.16 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You have a custom application
that queries a list, and then generates a report every night at 01:00. You discover that the report cannot be
executed due to the list view threshold. You need to ensure that the report is executed successfully. What
should you modify from Central Administration?
A. the Resource Throttling settings
B. the schedule for the Microsoft SharePoint Foundation Usage Data Processingjob
C. the User Solution Management settings
D. the schedule for the Solution Daily Resource Usage Update job
Answer: A

Microsoft   70-667   70-667최신덤프

NO.17 You configure a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to perform
backup and restore of a site collection and its content database by using Windows PowerShell. Which
command should you run to back up a web application?
A. Backup-SPSite http://localhost -Path \\FileServer_Name\SharePointBackupFolder\SiteBackup. bak
B. Restore-SPFarm -Directory \\FileServer_Name\ share\site_name.bak -RestoreMethod Overwrite
-ConfigurationOnly
C. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -BackupMethod Full
D. Restore-SPFarm -Directory \\FileServer_Name\share\site_name.bak -RestoreMethod Overwrite Item
"Farm\Microsoft SharePoint Foundation Web Application\AdventureWorks"
E. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -Item "Farm\Microsoft
SharePoint Foundation Web Application\AdventureWorks" -BackupMethodFull
F. Backup-SPFarm -Directory \\FileServer_Name\SharePointBackupFolder -BackupMethod Full Item
WSS_AdventureWorks
G. Restore-SPFarm -Directory \\FileServer_Name\share\site_name.bak -RestoreMethod Overwrite Item
WSS_AdventureWorks
H. Restore-SPSite http://localhost -Path \\FileServer_Name\SharePointBackupFolder SiteBackup. bak
-Force
Answer: F

Microsoft   70-667자격증   70-667자료   70-667

NO.18 You have a deployment of Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2). The
deployment includes the following servers:
A. One Microsoft SQL Server 2005 server named Server1
B. One SharePoint server named Server2
All servers run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You need to ensure that
you can perform an in-place upgrade of SharePoint Server 2010 Service Pack 1 (SP1).
What should you do?
A. On Server2, upgrade to the 64-bit edition of Windows Server 2008.
B. On Server1, upgrade SQL Server 2005 to SQL Server 2008.
C. On Server1, upgrade to the 64-bit edition of Windows Server 2008
D. On Server2, install Windows Server 2003 Service Pack 3 (SP3).
Answer: A

Microsoft   70-667   70-667   70-667인증   70-667인증

NO.19 You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. You need to back up the
contents of a custom list every day. The solution must minimize the size of the backup.
What should you do?
A. From Central Administration, click Performa site collection backup.
B. From Central Administration, click Perform a backup.
C. Create a scheduled task that runs the backup-spsite cmdlet.
D. Create a scheduled task that runs the export-spweb cmdlet.
Answer: D

Microsoft   70-667   70-667   70-667   70-667

NO.20 ( Note: This quesiton is part of a series of questions that use the same set of answer choices. Each
answer choice may be used once, more than once, or not at all.)
You have a SharePoint Server 2010 Service Pack 1 (SP1) server farm. The farm contains two web
applications named WebApp1 and WebApp2. WebApp1 contains one site collection. The site collection
contains 300 sites.
WebApp2 is used to host personal sites.
You need to ensure that you receive a notification when more than 400 personal sites are created.
Which Windows PowerShell cmdlet should you use?
A. Set-SPContentDatabase
B. New-SPWebApplication
C. Set-SPTimerJob
D. Set-SPWeb
E. Set-SPLogLevel
F. Set-SPDiagnosticConfig
G. Enable-SPTimerJob
H. Set-SPUsageService
I. Remove-SPUsageApplication
J. Set-SPAlternateURL
K. New-SPWebApplicationExtension
L. Enable-SPHealthAnalysisRule
M. Set-SPSite
N. Install-SPApplicationContent
Answer: A

Microsoft   70-667   70-667   70-667

ITexamdump의 M70-301덤프의 VCE테스트프로그램과 JN0-690덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 LOT-951시험에 대비한 고품질 덤프와 1z0-465시험 최신버전덤프를 제공해드립니다. 최고품질 MB2-866시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-667.html

Microsoft 70-691 인증 덤프

Microsoft인증 70-691시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 Microsoft인증 70-691덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여Microsoft인증 70-691시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.

ITExamDump는Microsoft 70-691시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Microsoft 70-691시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft 70-691시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

ITExamDump는 많은 분들이Microsoft인증70-691시험을 응시하여 성공하도록 도와주는 사이트입니다ITExamDump의 Microsoft인증70-691 학습가이드는 시험의 예상문제로 만들어진 아주 퍼펙트한 시험자료입니다. Microsoft인증70-691시험은 최근 가장 인기있는 시험으로 IT인사들의 사랑을 독차지하고 있으며 국제적으로 인정해주는 시험이라 어느 나라에서 근무하나 제한이 없습니다. ITExamDump로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.

다른 방식으로 같은 목적을 이룰 수 있다는 점 아세요? 여러분께서는 어떤 방식, 어느 길을 선택하시겠습니까? 많은 분들은Microsoft인증70-691시험패스로 자기 일에서 생활에서 한층 업그레이드 되기를 바랍니다. 하지만 모두 다 알고계시는그대로Microsoft인증70-691시험은 간단하게 패스할 수 있는 시험이 아닙니다. 많은 분들이Microsoft인증70-691시험을 위하여 많은 시간과 정신력을 투자하고 있습니다. 하지만 성공하는 분들은 적습니다.

ITExamDump에서는 Microsoft인증 70-691시험을 도전해보시려는 분들을 위해 퍼펙트한 Microsoft인증 70-691덤프를 가벼운 가격으로 제공해드립니다.덤프는Microsoft인증 70-691시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.

시험 번호/코드: 70-691
시험 이름: Microsoft (TS: Windows HPC Server 2008, Developing)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 95 문항
업데이트: 2013-10-30

70-691 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-691.html

NO.1 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to ensure that when the application starts, a parameter value is communicated to each process
in the cluster by using a single call.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: B

Microsoft   70-691 pdf   70-691 dumps   70-691기출문제

NO.2 You plan to develop a parallel application by using Windows HPC Server 2008.
You plan to use a method to control the calculations performed by each individual process.
You need to ensure that different commands can be sent to each process.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: A

Microsoft   70-691   70-691   70-691   70-691 pdf

NO.3 }
You need to ensure that the total number of numDarts is only available on the process that has a rank 0.
Which code segment should you insert at line 13?
A. MPI_Reduce(&numDarts, &total, 1, MPI_INT, MPI_SUM, 0, MPI_COMM_WORLD)
B. MPI_Allreduce(&total, &numDarts, 1, MPI_INT, MPI_SUM, MPI_COMM_WORLD)
C. MPI_Gather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, 0, MPI_COMM_WORLD)
D. MPI_Allgather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, MPI_COMM_WORLD)
Answer: A

Microsoft인증   70-691시험문제   70-691   70-691자격증
10. You plan to develop a Microsoft Message Passing Interface (MPI) application by using Microsoft
Visual Studio.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application.
You need to ensure that the application compiles for a 64-bit architecture.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the Import Library property to msmpi.lib.
B. Set the Additional Dependencies property to msmpi.lib.
C. Set the Additional Library Directories property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
D. Set the Additional Manifest Dependencies property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
Answer: BC

Microsoft기출문제   70-691 dumps   70-691   70-691   70-691
11. You develop a parallel application by using Microsoft Visual Studio 2008.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application based on Microsoft Message Passing Interface (MPI). You set the
Debugger to Launch property to MPI Cluster Debugger.
You need to ensure that five processes are launched when the application is run in debug mode in Visual
Studio 2008.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the MPIRun Arguments property to -n 5.
B. Set the Application Arguments property to -n 5.
C. Set the MPIRun Working Directory property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin.
D. Set the MPIRun Command property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin\MPIExec.
E. Set the Application Command property to C:\Program Files\Microsoft HPC Pack 2008
SDK\bin\MPIExec.
Answer: AD

Microsoft   70-691자료   70-691   70-691   70-691 pdf
12. You create a parallel application by using Microsoft Visual Studio 2008.
The application prints a message to the console of all Microsoft Message Passing Interface (MPI)
processes except for one. The application terminates and displays an error message.
You need to change the code in the application so that the application completes successfully.
Which set of tasks should you include in the application?
A. Include mpi.h
Link to msmpi.lib
Call MPI_Start
Call MPI_Comm_rank
Call MPI_Finalize
B. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_rank
Call MPI_Finalize
C. Include mpi.h
Link to ccpapi.tlb
Call MPI_Init
Call MPI_Comm_rank
D. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_size
Answer: B

Microsoft dump   70-691   70-691   70-691자격증
13. You plan to create a parallel application by using Microsoft Visual C++.
You want to use the Microsoft Message Passing Interface (MPI) library in the application.
You need to ensure that the application can be compiled for both 32-bit and 64-bit platforms. You also
need to ensure that targeting both platforms requires minimum maintenance.
What should you do?
A. Create a separate project for each platform.
B. Create separate solution files for each platform.
C. Create separate custom build rules for each platform.
D. Create a separate build configuration for each platform.
Answer: D

Microsoft자격증   70-691   70-691   70-691덤프
14. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
The application process is named MPIApplication.exe. You plan to debug the application by using the MPI
Cluster Debugger in Visual Studio 2008.
You need to attach the debugger to the remote process on a compute node.
Which process should you attach to?
A. smpd.exe
B. mpiexec.exe
C. msvmon.exe
D. MPIApplication.exe
Answer: C

Microsoft최신덤프   70-691   70-691   70-691자료   70-691
15. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
You plan to debug the application by using Visual Studio 2008.
You need to configure the nodes that will be used for debugging.
What should you do?
A. Use the Cluster Debugger Configuration tool in Visual Studio.
B. Use the debugging pane in the Visual Studio project property pages.
C. Use the configuration pane in the Cluster Administration Console tool.
D. Use the node management pane in the Cluster Administration Console tool.
Answer: A

Microsoft기출문제   70-691 dumps   70-691   70-691인증

NO.4 if (x*x + y*y <= 1.0)

NO.5 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 MPI_Init(&argc, &argv);
02
03 {
04 // program part for rank 0
05
06 }
06 else
07 {
08 // program part for all other ranks
09 }
10 MPI_Finalize();
You need to ensure that the code in the rank 0 section only executes on the process that has a rank of 0.
Which code segment should you insert at line 02?
A. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size > 0)
B. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size == 0)
C. int rank
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
if (rank == 0)
D. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(hostName, &resultlen);
char masterName[] = "rank0";
if (strcmp(masterName, hostName) != 0)
Answer: C

Microsoft   70-691   70-691자격증   70-691   70-691

NO.6 ++numDarts;

NO.7 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to implement a method that will send different data to each process in a communicator by using
a single call.
Which function should you use?
A. MPI_Send
B. MPI_Gather
C. MPI_Reduce
D. MPI_Scatter
Answer: D

Microsoft   70-691   70-691

NO.8 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment that computes an approximation to Pi. (Line numbers are included
for reference only.)
01 static int totDarts = 10000;
02 int numDarts = 0;
03
04 MPI_Comm_size(MPI_COMM_WORLD, &commSize);
05 MPI_Comm_rank(MPI_COMM_WORLD, &commRank);
06
07 for(i = 0; i < totDarts; i++) {
08 x = 2 * (randomNr() - 0.5);
09 y = 2 * (randomNr() - 0.5);

NO.9 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
The application uses point-to-point communication.
The process that has a rank 0 sends an array of integer values to the rank 1 process by using the
following code segment. (Line numbers are included for reference only.)
01 int values[5];
02 MPI_Send(values, 5, MPI_INT, 1, 42,
03 MPI_COMM_WORLD);
You need to ensure that each receiving process is able to correctly receive the values in the most efficient
manner possible.
Which code segment should you use?
A. int values[5];
int buffer[5];
MPI_Reduce(buffer, values, 5, MPI_INT, MPI_SUM, 1, MPI_COMM_WORLD);
B. int values[5];
MPI_Status status;
MPI_Recv(values, 5, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
C. int value;
MPI_Status status;
MPI_Recv(&value, 1, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
D. int values[5];
MPI_Status status;
MPI_Recv(values, sizeof(int), MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
Answer: B

Microsoft최신덤프   70-691   70-691인증

NO.10 if(commRank == 0) {

NO.11

NO.12 }

NO.13 printf("Pi = %d\n", pi);

NO.14 pi = 4 * total/(commSize * totDarts);

NO.15 You plan to develop a parallel application by using Windows HPC Server 2008.
The application performs the following tasks:
x Performs multistep calculations
x Processes data by using the same code segment that runs on each compute node
You need to ensure that each compute process executes the same step simultaneously.
Which type of communication should you use?
A. Buffered
B. Collective
C. Non-blocking
D. Point-to-point
Answer: B

Microsoft   70-691 dumps   70-691   70-691자격증   70-691최신덤프   70-691

NO.16 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 int rank;
02 MPI_Comm_rank(MPI_COMM_WORLD, &rank);
03 // declaration of variable hostName
04 // code to execute
05
06 std::cout << "hostname of rank " << rank;
07 std::cout << ": " << hostName << "\n";
You need to ensure that a variable named hostName contains the name of the cluster node that the code
runs on.
Which code segment should you add at line 05?
A. char *hostName = getenv("MPI_HOSTNAME");
B. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(&resultlen, hostName);
C. char hostName[MPI_MAX_NAME_STRING];
int resultlen;
MPI_Comm_get_name(MPI_COMM_WORLD, hostName, &resultlen);
D. char hostName[256];
int resultlen = sizeof(hostName);
if (rank == 0)
{
gethostname(hostName, resultlen);
}
Answer: B

Microsoft인증   70-691덤프   70-691자격증   70-691   70-691   70-691 pdf

NO.17 You plan to develop a single program multiple data (SPMD) application by using Windows HPC Server
2008.
You use multiple processes to perform intermediate calculations and to provide the results as a single
number.
You need to ensure that the intermediate results are collected and added together by using a single MPI
function.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: D

Microsoft자료   70-691 pdf   70-691   70-691시험문제

ITexamdump의 MSC-431덤프의 VCE테스트프로그램과 VCP510PSE덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCPC510시험에 대비한 고품질 덤프와 LOT-442시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-E56시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-691.html

Microsoft 자격증 MB5-625 시험문제와 답

Microsoft인증 MB5-625시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Microsoft인증 MB5-625시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는Microsoft 인증MB5-625시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.

우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로Microsoft인증MB5-625시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.

ITExamDump의Microsoft인증 MB5-625덤프는 인터넷에서 검색되는Microsoft인증 MB5-625시험공부자료중 가장 출중한 시험준비 자료입니다. Microsoft인증 MB5-625덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.

IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의Microsoft 인증MB5-625시험대비 덤프로Microsoft 인증MB5-625시험을 패스하세요.

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. Microsoft인증 MB5-625덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Microsoft인증 MB5-625덤프 적중율과 패스율은 100% 보장해드립니다. Microsoft인증 MB5-625시험에 도전하려는 분들은ITExamDump 의Microsoft인증 MB5-625덤프로 시험을 준비할것이죠?

시험 번호/코드: MB5-625
시험 이름: Microsoft (C5 4.0 Project)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 38 문항
업데이트: 2013-10-30

Microsoft MB5-625 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Microsoft MB5-625시험대비 덤프는Microsoft MB5-625시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.

MB5-625 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB5-625.html

NO.1 The "Project is posted in finance" parameter shall be set to yes, if ...
A. the inventory table is used
B. costs posted in the project journal must be posted in G/L
C. invoicing is done from the project table
D. the salary module is used
Answer: B

Microsoft dump   MB5-625 dumps   MB5-625 dump   MB5-625

NO.2 If costs are budgeted to a project with a parent project, how are these costs registered to the main
project?
A. These costs must be manually stated for the main project under the tab "Head. CTs" on all project
levels
B. In the case of several project levels, the head. CTs are only updated automatically on the level just
above the sub project
C. In the case of several project levels, the head. CTs are updated on all levels
D. In the case of several project levels, the head. CTs are only updated at the lowest level
Answer: C

Microsoft   MB5-625   MB5-625

NO.3 Which employees can be registered in project postings?
A. All employees who have been created in the employee table
B. Only the employees appearing in the "Sales rep." field
C. All employees who are registered with usernames in C5
D. This functionality is not possible
Answer: A

Microsoft   MB5-625인증   MB5-625최신덤프

NO.4 Registrations of projects must always be indicated by...
A. project number and nothing else
B. project number, CT and head. CT
C. project number and CT
D. time registration
Answer: C

Microsoft덤프   MB5-625   MB5-625   MB5-625

NO.5 If you use the invoicing principle, when should you allocate 100%?
A. At the end of each financial year
B. When the project has been fully invoiced
C. At the end of the year in which the project has been fully invoiced
D. Never
Answer: B

Microsoft시험문제   MB5-625   MB5-625시험문제   MB5-625기출문제   MB5-625최신덤프

ITexamdump의 000-593덤프의 VCE테스트프로그램과 700-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 644-068시험에 대비한 고품질 덤프와 HP3-C29시험 최신버전덤프를 제공해드립니다. 최고품질 C_TERP10_65시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/MB5-625.html

Microsoft MB7-846 덤프

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft MB7-846시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.

많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은Microsoft MB7-846인증시험을 한번에 통과할 수 있습니다, ITExamDump에서Microsoft MB7-846시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft MB7-846관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

ITExamDump는Microsoft MB7-846인증시험의 촉매제 같은 사이트입니다.Microsoft MB7-846인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Microsoft MB7-846인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Microsoft MB7-846덤프자료가 많은 도움이 될 것입니다.

시험 번호/코드: MB7-846
시험 이름: Microsoft (NAV 2009 Relationship Management)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 50 문항
업데이트: 2013-10-30

MB7-846 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB7-846.html

NO.1 You are a sales manager for a company that has just upgraded to Microsoft Dynamics NAV 2009. You
are setting up Relationship Management and need to set up e mail logging to trace your e mail
messages with contacts, customers, and vendors. Where can you define all of the e mail logging setup
options?
A. Role Center
B. Marketing Setup window in the RoleTailored client
C. Marketing Setup window in the Classic client
D. Interaction Template Setup window in the Classic or RoleTailored client
Answer: C

Microsoft   MB7-846   MB7-846기출문제   MB7-846 dumps

NO.2 Which of the following activities in Microsoft Dynamics NAV 2009 can be automatically recorded as an
interaction?
A. Creating a finance charge memo
B. Archiving a sales order
C. Posting a purchase order
D. Printing a purchase receipt
Answer: D

Microsoft시험문제   MB7-846   MB7-846덤프

NO.3 What must you set up in the Interaction Template Setup window for the program to automatically log
outgoing phone calls you make as an interaction?
A. Synchronization with customers and vendors
B. Interaction template code
C. Logging user ID
D. Correspondence type
Answer: B

Microsoft인증   MB7-846기출문제   MB7-846덤프   MB7-846   MB7-846자료

NO.4 What must you set up in Relationship Management to synchronize customers, vendors, and bank
accounts with contacts?
A. Interaction IDs
B. Duplicates
C. Inheritance codes
D. Business relation codes
Answer: D

Microsoft   MB7-846 dumps   MB7-846자격증

NO.5 Which of the following Relationship Management entities are processed by the program when you
search for a contact using the Contact Search feature? Choose the 3 that apply.
A. Contacts
B. Campaigns
C. To dos
D. Comments
Answer: A, C, D

Microsoft   MB7-846   MB7-846최신덤프   MB7-846자료   MB7-846 dump

ITexamdump의 E20-891덤프의 VCE테스트프로그램과 312-50v8덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-597시험에 대비한 고품질 덤프와 156-215.13시험 최신버전덤프를 제공해드립니다. 최고품질 74-324시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/MB7-846.html

Microsoft 70-669 덤프자료

ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다

여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증70-669시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Microsoft인증70-669시험을 패스하도록 하겠습니다. 만약Microsoft인증70-669시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.

저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Microsoft 70-669실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한ITExamDump의 Microsoft 70-669덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Microsoft 70-669시험은ITExamDump제품으로 간편하게 도전해보시면 후회없을 것입니다.

성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Microsoft인증 70-669시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Microsoft인증 70-669덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증70-669시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에Microsoft 70-669인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

시험 번호/코드: 70-669
시험 이름: Microsoft (TS:Windows Server 2008 R2, Desktop Virtualiazation)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 56 문항
업데이트: 2013-10-30

70-669 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-669.html

NO.1 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7.Your environment includes Microsoft Enterprise
Desktop Virtualization (MED-V).
You are preparing to update a MED-V Workspace that is used by 1000 client computers.
You need to minimize the network impact of updating the Workspace.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A.Pack the Workspace images.
B.Enable Trim Transfer on the Workspace.
C.Send each virtual machine file storage folder to a compressed (zipped) folder.
D.Use Distributed File System (DFS) service to publish the images.
Answer: A AND B

Microsoft pdf   70-669   70-669   70-669덤프   70-669 pdf

NO.2 All client computers in your company run Windows 7. Windows Virtual PC is installed on all client
computers.
You create and configure a virtual machine (VM) named Guest1.
You need to use the Guest1 virtual hard disk (VHD) as a base for additional VMs that will run on the same
host computer, and minimize the disk space required for each new VM.
Which type of VHD should you create for the new VMs?
A.fixed size
B.differencing
C.dynamically expanding
D.linked to a physical hard disk
Answer: B

Microsoft   70-669최신덤프   70-669 dump

NO.3 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7.You use Microsoft Enterprise Desktop Virtualization
(MED-V).
You need to prepare the MED-V server for cluster mode.
What should you do?
A.Copy the ConfigurationServer folder to a network share.
B.Add the Failover Clustering feature to the MED-V server.
C.Add the Network Load Balancing (NLB) feature to the MED-V server.
D.Migrate the MED-V server to a highly available virtual machine (HAVM).
Answer: A

Microsoft pdf   70-669   70-669   70-669덤프   70-669 pdf   70-669

NO.4 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7. You manage client computers by using Microsoft
System Center Configuration Manager 2007 R2.
You are deploying Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization
requirements.
You need to ensure that administrators can centrally store MED-V logging information and generate
reports.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A.Install and configure IIS on a member server.
B.Configure a shared folder on a member server.
C.Install and configure Microsoft SQL Server 2008 on a member server.
D.Configure permissions for the shared folder on a member server.
Answer: A AND C

Microsoft   70-669   70-669 dump   70-669 dump   70-669   70-669시험문제

NO.5 All client computers in your company run Windows 7 Enterprise.
You are planning to deploy a custom application that runs only on Windows XP to all users.
You install Windows XP Mode on each host computer and install the application in the Windows XP guest
virtual machine s (VM s ). You verify that the application runs in the guest VM s .
A n a pplication shortcut does not appear on the Windows 7 host computer s .
You need to ensure that the application can be launched directly from the Windows 7 host computer s .
What should you do in the guest VM s ?
A.Repair the application.
B.Use Programs and Features in the Control Panel to change the application.
C.Copy the application shortcut to the Start menu for All Users.
D.Assign the Full Control permission to the application shortcut to the Everyone group.
Answer: C

Microsoft dumps   70-669덤프   70-669   70-669   70-669   70-669

NO.6 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization
(MED-V) to support client virtualization requirements.
You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available
to all client computers.
What should you do?
A.Install and configure IIS on a member server.
B.Configure a shared folder on a member server.
C.Create a single workspace for all client computers.
D.Install and configure Microsoft SQL Server 2008 on a member server.
Answer: A

Microsoft기출문제   70-669   70-669 dump   70-669자료

NO.7 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7. Your environment includes Microsoft Enterprise
Desktop Virtualization (MED-V).
You update the MED-V Workspace virtual machines (VMs) several times and notice that the server is
running out of disk space.
You need to configure the Workspace to minimize the disk space requirements.
What should you do?
A.Configure the Workspace as revertible.
B.Set an expiration date for the Workspace.
C.Specify the number of image versions to keep.
D.Specify that clients should use Trim Transfer when downloading images.
E.Answer: C

Microsoft dump   70-669   70-669   70-669

NO.8 All client computers in your company run Windows 7 Enterprise. Each client computer runs one guest
virtual machine (VM) in Windows Virtual PC .
A user reports that a supported USB device connected to his client computer does not appear in the guest
VM. The USB device functions correctly on the client computer.
You need to ensure that the USB device can be installed in the guest VM.
What should you do?
A.Use Virtual PC Manager to attach the USB device on the host.
B.Run the Add Hardware Wizard in the guest.
C.Use the Computer Management console to scan for hardware changes in the guest.
D.Use the Computer Management console to update the USB Virtualization Bus driver on the host.
Answer: A

Microsoft시험문제   70-669최신덤프   70-669   70-669시험문제

NO.9 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows
Server 2008 R2. All client computers run Windows 7.
Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V). You use MED-V to
support temporary test environments.
You need to ensure that the disk space used by obsolete Workspaces is automatically minimized.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A.Configure the Workspace as revertible.
B.Set an expiration date for the Workspace.
C.Specify the number of image versions to keep.
D.Configure automatic deletion of the Workspace.
E.Answer: B AND D

Microsoft   70-669   70-669덤프   70-669

NO.10 All client computers in your company run Windows 7 Enterprise.
Users run Windows XP Mode guest virtual machines (VMs) on their computers. Each client computer
runs two guest VMs.
Each guest VM requires network connectivity to the other guest VM on the host computer, but must not
have network connectivity to the host computer operating system or to the Internet.
You need to configure each guest VM to meet the requirements.
What should you do?
A.Set each VM network adapter to Not connected.
B.Configure each VM to use one Internal Network network adapter.
C.Configure each VM to use one Shared Networking (NAT) network adapter.
D.Disable Integration Features for each VM. Configure Windows Firewall to allow incoming ICMP traffic,
and remove all other Windows Firewall exceptions.
Answer: B

Microsoft자료   70-669 dumps   70-669   70-669   70-669   70-669인증

ITexamdump의 JN0-533덤프의 VCE테스트프로그램과 HP2-B100덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-341시험에 대비한 고품질 덤프와 3107시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-633시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-669.html

70-511 덤프 Microsoft 인증 시험

ITExamDump의 Microsoft인증 70-511덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Microsoft인증 70-511덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Microsoft인증 70-511덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.

ITExamDump에서는 시장에서 가장 최신버전이자 적중율이 가장 높은 Microsoft인증 70-511덤프를 제공해드립니다. Microsoft인증 70-511덤프는 IT업종에 몇십년간 종사한 IT전문가가 실제 시험문제를 연구하여 제작한 고품질 공부자료로서 시험패스율이 장난 아닙니다. 덤프를 구매하여 시험에서 불합격성적표를 받으시면 덤프비용 전액을 환불해드립니다.

많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.

Microsoft인증 70-511시험은 IT인증시험중 가장 인기있는 시험입니다. Microsoft인증 70-511시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 Microsoft인증 70-511덤프로 시험준비하여 고득점으로 자격증을 따보세요.

모두 아시다시피Microsoft 70-511인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.Microsoft 70-511인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.

Microsoft인증70-511시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Microsoft인증70-511시험패스로 꿈을 이루어주는 사이트입니다. 우리는Microsoft인증70-511시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Microsoft인증70-511시험을 응시할 수 있는 자료입니다.

안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Microsoft 70-511인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Microsoft 70-511문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Microsoft 70-511인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.

시험 번호/코드: 70-511
시험 이름: Microsoft (TS: Windows Applications Development with Microsoft .NET Framework 4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 156 문항
업데이트: 2013-10-30

70-511 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-511.html

NO.1 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel TextBox.PreviewTextInput="StackPanel_PreviewTextInput">
<TextBox Name="TxtBoxA"/>
<TextBox Name="TxtBoxB"/>
<TextBox Name="TxtBoxC"/>
</StackPanel>
You create an event handler named StackPanel_PreviewTextInput. You also have a collection of strings
named Keywords.
You need to ensure that TxtBoxA and TxtBoxB do not contain any of the strings in the Keywords
collections.
Which code segment should you use?
A. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
}} e.Handled = true;
} }
B. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e) {
FrameworkElement feSource = e.Source as FrameworkElement;
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB") {
foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
} e.Handled = true;
C. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{
FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return; }
} e.Handled = false;
} }
D. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = e.Source as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{
foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return;
} } e.Handled = false;
}
}
Answer: D

Microsoft dump   70-511 pdf   70-511덤프   70-511자료

NO.2 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment.
public class Contact { private string _contactName;
public string ContactName {
get { return _contactName; }
set {
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
}
}
You add the following code fragment in a WPF window control.
<TextBox Text="{Binding Path=ContactName, ValidatesOnExceptions=True,
UpdateSourceTrigger=PropertyChanged}" />
The TextBox control is data-bound to an instance of the Contact class. You plan to implement an
ErrorTemplate in the TextBox control.
You need to ensure that the validation error message is displayed next to the TextBox control. Which code
fragment should you use?
A. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=AdornedElement.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
B. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
C. <ControlTemplate>
<DockPanel>
<ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=ContentControl.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
D. <ControlTemplate>
<DockPanel> <ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
Answer: A

Microsoft기출문제   70-511   70-511   70-511   70-511

NO.3 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You add a new class named Customer to the application.
You select the Customer class to create a new object data source.
You add the following components to a Windows Form:
- A BindingSource component named customerBindingSource that is data-bound to the Customer object
data source.
- A set of TextBox controls to display and edit the Customer object properties.
- Each TextBox control is data-bound to a property of the customerBindingSource component.
- An ErrorProvider component named errorProvider that validates the input values for each TextBox
control.
You need to ensure that the input data for each TextBox control is automatically validated by using the
ErrorProvider component.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Implement the validation rules inside the Validating event handler of each TextBox control by throwing
an exception when the value is invalid.
B. Implement the validation rules inside the TextChanged event handler of each TextBox control by
throwing an exception when the value is invalid.
C. Implement the validation rules inside the setter of each property of the Customer class by throwing an
exception when the value is invalid.
D. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource;
E. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource.DataSource;
this.errorProvider.DataMember = this.customerBindingSource.DataMember;
Answer: CD

Microsoft dumps   70-511 dump   70-511   70-511   70-511

NO.4 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a window that contains a Button control and a MenuItem control. Both controls are labeled
"Add sugar."
The Command properties of the Button and MenuItem controls are set to the same RoutedCommand
named AddSugarCommand.
You write the following code segment.
private void CanAddSugar (object sender, CanExecuteRoutedEventArgs e) { ... }
You need to ensure that when the CanAddSugar method sets e.CanExecute to false, the MenuItem and
Button controls are disabled.
What should you do?
A. Create an event handler for the CanExecuteChanged event of the AddSugarCommand command.
Call the CanAddSugar method from within the event handler.
B. Inherit the AddSugarCommand from the RoutedUICommand class instead of the RoutedCommand
class.
Call the CanAddSugar method from within the constructor of the AddSugarCommand command.
C. Add a CommandBinding object to the CommandBinding property of the MenuItem control.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
D. Add a CommandBinding object to the CommandBindings property of the window.
Set the Command property of CommandBinding to the AddSugarCommand command.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
Answer: D

Microsoft dump   70-511   70-511

NO.5 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel>
<StackPanel.Resources>
<Style TargetType="{x:Type Button}">
<EventSetter Event="Click" Handler="ButtonHandler"/>
</Style>
</StackPanel.Resources>
<Button Name="OkButton">Ok</Button>
<Button Name="CancelButton" Click="CancelClicked">Cancel</Button>
</StackPanel>
You need to ensure that the ButtonHandler method is not executed when the user clicks the CancelButton
button.
Which code segment should you add to the code-behind file?
A. private void CancelClicked(object sender, RoutedEventArgs e)
{
Button btn = (Button)sender;
btn.Command = null;
}
B. private void CancelClicked(object sender, RoutedEventArgs e) {
Button btn = (Button)sender;
btn.IsCancel = true;
}
C. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = true;
}
D. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = false;
}
Answer: C

Microsoft   70-511   70-511 dumps

NO.6 You create a Windows client application by using Windows Presentation Foundation (WPF).
The application contains the following code fragment.
<Window.Resources>
<DataTemplate x:Key="detail">
<!--...-->
</DataTemplate>
</Window.Resources>
<StackPanel>
<ListBox Name="lbDetails">
</ListBox>
<Button Name="btnDetails">Details</Button>
</StackPanel>
You need to assign lbDetails to use the detail data template when btnDetails is clicked.
Which code segment should you write for the click event handler for btnDetails?
A. lbDetails.ItemsPanel.FindName("detail",lbDetails);
B. var tmpl = (ControlTemplate)FindResource("detail"); lbDetails.Template = tmpl;
C. var tmpl = (DataTemplate)FindName("detail"); lbDetails.ItemTemplate = tmpl;
D. var tmpl = (DataTemplate)FindResource("detail"); lbDetails.ItemTemplate=tmpl;
Answer: D

Microsoft최신덤프   70-511   70-511 pdf   70-511

NO.7 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application has a window named MainWindow that has a StackPanel control named sp as the root
element.
You want to create a Button control that contains a TextBlock control with the "Save" Text property.
You need to create the control dynamically and add the control to sp.
Which code segment should you write in the constructor of the MainWindow class?
A. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.DataContext = btn;
B. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.Children.Add(btn);
C. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
sp.Children.Add(btn);
sp.Children.Add(text);
D. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.ContentTemplateSelector.SelectTemplate(text, null);
sp.Children.Add(btn);
Answer: B

Microsoft   70-511 dumps   70-511

NO.8 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You plan to use a Windows Presentation Foundation (WPF) control of the UserControl1 type hosted in an
ElementHost control named elementHost1.
You write the following code segment. (Line numbers are included for reference only.)
01public class WPFInWinForms {
02public WPFInWinForms
03{
04InitializeComponent();
05
06}
07private void OnBackColorChange(object sender, String propertyName, object value)
08{
09ElementHost host = sender as ElementHost;
10System.Drawing.Color col = (System.Drawing.Color)value;
11SolidColorBrush brush =
new SolidColorBrush(System.Windows.Medi
a.Color.FromRgb(col.R, col.G, col.B));
12UserControl1 uc1 = host.Child as UserControl1;
13uc1.Background = brush;
14}
15}
You need to ensure that the application changes the background color of the hosted control when the
background color of the form changes.
Which code segment should you insert at line 05?
A. elementHost1.PropertyMap.Remove("BackColor");
elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
B. elementHost1.PropertyMap.Remove("Background");
elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
C. elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("BackColor");
D. elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("Background");
Answer: A

Microsoft   70-511 pdf   70-511

NO.9 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment. (Line numbers are included for reference only.)
01public class Contact
02{
03private string _contactName;
04
05public string ContactName {
06get { return _contactName; }
07set { _contactName = value; }
08}
09
10}
You add the following code fragment within a WPF window control.
<TextBox>
<TextBox.Text>
<Binding Path="ContactName" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<DataErrorValidationRule />
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
The TextBox control is data-bound to an instance of the Contact class.
You need to ensure that the Contact class contains a business rule to ensure that the ContactName
property is not empty or NULL.
You also need to ensure that the TextBox control validates the input data.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two).
A. Replace line 01 with the following code segment. public class Contact : IDataErrorInfo
B. Replace line 01 with the following code segment. public class Contact : ValidationRule
C. Replace line 01 with the following code segment. public class Contact : INotifyPropertyChanging
D. Add the following code segment at line 04. public event PropertyChangingEventHandler
PropertyChanging;
E. Modify line 07 with the following code segment:
set {
if (this.PropertyChanging != null)
PropertyChanging(this, new
PropertyChangingEventArgs("ContactName"));
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
F. Add the following code segment at line 09.
public string Error {
public string this[string columnName] {
get {
if (columnName == "ContactName" &&
string.IsNullOrEmpty(this.ContactName))
return "Contact name is required";
return null;
}
}
Answer: AF

Microsoft최신덤프   70-511기출문제   70-511시험문제   70-511   70-511 pdf

NO.10 You use Microsoft Visual Studio 2010 and Microsoft .
NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a WPF window in the application.
You add the following code segment to the application.
public class ViewModel
{
public CollectionView Data { get; set; }
}
public class BusinessObject
{
public string Name { get; set; }
}
The DataContext property of the window is set to an instance of the ViewModel class.
The Data property of the ViewModel instance is initialized with a collection of BusinessObject objects.
You add a TextBox control to the Window.
You need to bind the Text property of the TextBox control to the Name property of the current item of the
CollectionView of the DataContext object.
You also need to ensure that when a binding error occurs, the Text property of the TextBox control is set to
N/A .
Which binding expression should you use?
A. { Binding Path=Data/Name, FallbackValue='N/A' }
B. { Binding Path=Data.Name, FallbackValue='N/A' }
C. { Binding Path=Data/Name, TargetNullValue='N/A' }
D. { Binding Path=Data.Name, TargetNullValue='N/A' }
Answer: A

Microsoft기출문제   70-511 dump   70-511덤프   70-511덤프   70-511

NO.11 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You plan to use an existing Windows Forms control named MyWinFormControl in the MyControls
assembly.
You need to ensure that the control can be used in your application.
What should you do?
A. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<ElementHost>
<wf:MyWinFormControl x:Name="control" />
</ElementHost>
</Grid> </Window>
B. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<WindowsFormsHost>
<wf:MyWinFormControl x:Name="control" />
</WindowsFormsHost>
</Grid> </Window>
C. Add the following code segment to the WindowsLoaded function.
ElementHost host = new ElementHost();
host.Dock = DockStyle.Fill;
MyWinFormControl control = new MyWinFormControl();
host.Child = control;
this.Controls.Add(host);
D. Add the following code segment to the WindowsLoaded function.
Grid grid = new Grid();
System.Windows.Forms.Integration.WindowsFormsHost host = new
System.Windows.Forms.Integration.WindowsFormsHost();
MyWinFormControl control = new MyWinFormControl();
grid.Children.Add(host);
Answer: B

Microsoft덤프   70-511   70-511   70-511

NO.12 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
- Creates a text-changed event handler named Audit_TextChanged for the txtInput control.
- Executes Audit_TextChanged even when specific handlers mark the event as handled.
Which code segment should you add to the constructor of the user control.?
A. txtInput.TextChanged+=Audit_TextChanged;
B. AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
C. EventManager.RegisterClassHandler (typeof (TextBox),TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), true);
D. EventManager.RegisterClassHandler (typeof (TextBox), TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), false);
Answer: B

Microsoft자격증   70-511   70-511자료   70-511   70-511   70-511 dumps

NO.13 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
Which of the following statments are TRUE? (choose all that apply)
A. A text-changed event handler, named Audit_TextChanged, was Created for the txtInput control.
B. Audit_TextChanged will stop running because the event is marked as handled by certain event
handlers.
C. Even through the event is marked handled by certain event handlers, Audit_TextChanged will still run.
D. Audit_TextChanged will continue to run until the event is marked as handled.
Answer: AC

Microsoft덤프   70-511   70-511   70-511 pdf   70-511덤프

NO.14 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You have a dataset as shown in the following exhibit.
You plan to add a DataGridView to display the dataset.
You need to ensure that the DataGridView meets the following requirements:
- Shows Order Details for the selected order.
- Shows only Order Details for items that have UnitPrice greater than 20.
- Sorts Products by ProductName
Which code segment should you use?
A. ordersBindingSource.DataSource = productsBindingSource;
ordersBindingSource.DataMember = "FK_Order_Details_Products";
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
B. productsDataGridView.DataSource = ordersBindingSource;
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
C. order_DetailsBindingSource.DataSource = ordersBindingSource;
order_DetailsBindingSource.DataMember = "FK_Order_Details_Orders";
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
D. order_DetailsDataGridView.DataSource = ordersBindingSource;
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
Answer: C

Microsoft   70-511 dump   70-511   70-511   70-511

NO.15 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You want to add an audio player that plays .wav or .mp3 files when the user clicks a button.
You plan to store the name of the file to a variable named SoundFilePath.
You need to ensure that when a user clicks the button, the file provided by SoundFilePath plays.
What should you do?
A. Write the following code segment in the button onclick event.
System.Media.SoundPlayer player = new System.Media.
SoundPlayer(SoundFilePath); player.play();
B. Write the following code segment in the button onclick event.
MediaPlayer player = new MediaPlayer();
player.Open(new URI(SoundFilePath), UriKind.Relative)); player.play();
C. Use the following code segment from the PlaySound() Win32 API function and call the PlaySound
function in the button onclick event.
[sysimport(dll="winmm.dll")]
public static extern long PlaySound(String SoundFilePath, long hModule, long dwFlags);
D. Reference the Microsoft.DirectX Dynamic Link Libraries. Use the following code segment in the button
onclick event.
Audio song = new Song(SoundFilePath);
song.CurrentPosition = song.Duration; song.Play();
Answer: B

Microsoft   70-511   70-511   70-511최신덤프

ITexamdump의 C_TFIN52_64덤프의 VCE테스트프로그램과 NS0-504덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 156-215.13시험에 대비한 고품질 덤프와 000-318시험 최신버전덤프를 제공해드립니다. 최고품질 EX0-118시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-511.html

Microsoft 70-681 인증시험

Microsoft인증 70-681시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Microsoft인증 70-681시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Microsoft인증 70-681덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Microsoft인증 70-681덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 Microsoft인증 70-681덤프를 공부해보세요.

시험 번호/코드: 70-681
시험 이름: Microsoft (TS: Windows 7 and Office 2010, Deploying)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 85 문항
업데이트: 2013-10-30

ITExamDump의 Microsoft인증 70-681시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Microsoft인증 70-681시험덤프로 어려운 Microsoft인증 70-681시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.

제일 빠른 시일내에 제일 간단한 방법으로Microsoft인증 70-681시험을 패스하는 방법이 없냐구요? ITExamDump의Microsoft인증 70-681덤프를 공부하시면 가능합니다. ITExamDump의Microsoft인증 70-681덤프는 많은 분들이 검증한 가장 유력한Microsoft인증 70-681시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.

ITExamDump에서 출시한 Microsoft인증70-681 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 실제Microsoft인증70-681시험문제유형과 같은 형식으로 제작된Microsoft인증70-681 시험공부자료로서ITExamDump덤프의 실용가치를 자랑하고 있습니다.덤프를 공부하여 시험불합격하시면 덤프비용은 환불처리해드립니다.

70-681 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-681.html

NO.1 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft   70-681   70-681   70-681   70-681 dump

NO.2 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft dumps   70-681   70-681자료   70-681

NO.3 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft덤프   70-681   70-681   70-681   70-681 dumps

NO.4 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft   70-681   70-681자료   70-681

NO.5 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft dump   70-681   70-681   70-681   70-681최신덤프

NO.6 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft   70-681   70-681   70-681   70-681   70-681

NO.7 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft자격증   70-681   70-681   70-681   70-681 dump   70-681

NO.8 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft pdf   70-681자료   70-681덤프   70-681   70-681 pdf

NO.9 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft   70-681시험문제   70-681기출문제

NO.10 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft dumps   70-681자료   70-681   70-681시험문제   70-681

NO.11 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft   70-681   70-681 pdf   70-681   70-681자격증   70-681자료

NO.12 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft덤프   70-681 dumps   70-681 pdf   70-681

NO.13 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft dumps   70-681   70-681 dumps   70-681자료

NO.14 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft   70-681   70-681 dumps   70-681인증   70-681

NO.15 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft최신덤프   70-681   70-681   70-681덤프

ITexamdump의 3103덤프의 VCE테스트프로그램과 70-323덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-B104시험에 대비한 고품질 덤프와 HP2-Z25시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-958시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-681.html