ITExamDump 는 전문적으로 it전문인사들에게 도움을 드리는 사이트입니다.많은 분들의 반응과 리뷰를 보면 우리ITExamDump의 제품이 제일 안전하고 최신이라고 합니다. ITExamDump의 학습가이드는 아주 믿음이 가는 문제집들만 있으니까요. ITExamDump 덤프의 문제와 답은 모두 제일 정확합니다. 왜냐면 우리의 전문가들은 매일 최신버전을 갱신하고 있기 때문입니다.
우리ITExamDump가 제공하는 최신, 최고의SASInstitute A00-201시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.
시험 번호/코드: A00-201
시험 이름: SASInstitute (SAS base programming exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2013-10-27
여러분은 아직도SASInstitute A00-201인증시험의 난이도에 대하여 고민 중입니까? 아직도SASInstitute A00-201시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
ITExamDump의SASInstitute인증 A00-201덤프는 몇십년간 IT업계에 종사한 전문가들이SASInstitute인증 A00-201 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. SASInstitute인증 A00-201덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의SASInstitute인증 A00-201덤프는 SASInstitute인증 A00-201시험패스의 특효약입니다.
SASInstitute인증 A00-201시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의SASInstitute인증 A00-201덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의SASInstitute인증 A00-201덤프는SASInstitute인증 A00-201실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인SASInstitute인증 A00-201시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. SASInstitute인증 A00-201시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의SASInstitute인증 A00-201덤프는 SASInstitute인증 A00-201시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.
ITExamDump의 SASInstitute인증 A00-201시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 SASInstitute인증 A00-201시험덤프로 어려운 SASInstitute인증 A00-201시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
A00-201 덤프무료샘플다운로드하기: http://www.itexamdump.com/A00-201.html
NO.1 Click the Exhibit button to view a listing of the SASUSER.HOUSES data set.
The following SAS program is submitted:
proc report data = sasuser.houses nowd headline;
column style price;
where price lt 100000;
<insert DEFINE statement here>
define price / mean width = 9;
title;
run;
The following ouput is created by the REPORT procedure:
Which one of the following DEFINE statements completes the above program and produces the above
output?
A. define style / order width = 9;
B. define style / group width = 9;
C. define style / across width = 9;
D. define style / display width = 9;
Answer: B
SASInstitute자료 A00-201 A00-201 A00-201 A00-201 A00-201
NO.2 A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
<insert code here>
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750'
for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
Answer: C
SASInstitute자격증 A00-201 A00-201 A00-201
NO.3 The contents of two SAS data sets named EMPLOYEE and SALARY are listed below:
The following SAS program is submitted:
data work.empsalary;
merge work.employee (in = inemp)
work.salary (in = insal);
by name;
if inemp and insal;
run;
How many observations will the data set WORK.EMPSALARY contain?
A. 2
B. 4
C. 5
D. 6
Answer: B
SASInstitute A00-201 dumps A00-201 A00-201 A00-201 pdf
NO.4 The following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
Answer: B
SASInstitute덤프 A00-201최신덤프 A00-201인증
NO.5 The following SAS program is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
Answer: B
SASInstitute A00-201 A00-201자격증
NO.6 Which one of the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Answer: C
SASInstitute시험문제 A00-201자격증 A00-201 A00-201 A00-201 A00-201
NO.7 The contents of the raw data file CALENDAR are listed below:
----|----10---|----20---|----30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
Answer: D
SASInstitute A00-201 dumps A00-201덤프
NO.8 The SAS data set named WORK.TEST is listed below:
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;D.data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large'; airplanetype = 'Large';
staff = 10;
run;
Answer: B
SASInstitute dumps A00-201 A00-201자격증 A00-201 dump A00-201최신덤프
NO.9 The following SAS program is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet; run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
Answer: A
SASInstitute A00-201인증 A00-201 dump A00-201기출문제 A00-201덤프
NO.10 A raw data record is shown below:
07.an2002
Which one of the following informats would read this value and store it as a SAS date value?
A. date9.
B. ddmonyy9.
C. ddMMMyy9.
D. ddmmmyyyy9.
Answer: A
SASInstitute A00-201 A00-201 A00-201기출문제 A00-201자료
NO.11 Which one of the following is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for
further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains
observations up to that point.
Answer: B
SASInstitute A00-201 A00-201기출문제 A00-201자료
NO.12 The following SAS DATA step is submitted:
libname temp 'SAS-data-library';
data temp.report;
set sasuser.houses;
newvar = price * 1.04;
run;
Which one of the following statements is true regarding the program above?
A. The program is reading from a temporary data set and writing to a temporary data set.
B. The program is reading from a temporary data set and writing to a permanent data set.
C. The program is reading from a permanent data set and writing to a temporary data set.
D. The program is reading from a permanent data set and writing to a permanent data set.
Answer: D
SASInstitute A00-201 A00-201시험문제
NO.13 The following SAS program is submitted:
libname rawdata1 'location of SAS data library';
filename rawdata2 'location of raw data file';
data work.testdata;
infile <insert item here>;
input sales1 sales2;
run;
Which one of the following is needed to complete the program correctly?
A. rawdata1
B. rawdata2
C. 'rawdata1'
D. 'rawdata2'
Answer: B
SASInstitute A00-201자격증 A00-201 A00-201 A00-201
NO.14 The following SAS program is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
Answer: D
SASInstitute A00-201 dump A00-201 A00-201덤프 A00-201 dumps A00-201 dumps
NO.15 The following SAS program is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201 A00-201자격증 A00-201
NO.16 The following SAS program is submitted and reads 100 records from a raw data file:
data work.total;
infile 'file-specification' end = eof;
input name $ salary;
totsal + salary;
<insert IF statement here>
run;
Which one of the following IF statements writes the last observation to the output data set?
A. if end = 0;
B. if eof = 0;
C. if end = 1;
D. if eof = 1;
Answer: D
SASInstitute기출문제 A00-201 A00-201
NO.17 The following SAS SORT procedure step generates an output data set:
proc sort data = sasuser.houses out = report;
by style;
run;
In which library is the output data set stored?
A. WORK
B. REPORT
C. HOUSES
D. SASUSER
Answer: A
SASInstitute A00-201자료 A00-201인증 A00-201
NO.18 The following SAS program is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for
each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
Answer: A
SASInstitute덤프 A00-201덤프 A00-201기출문제 A00-201자료 A00-201시험문제
NO.19 The contents of the raw data file FURNITURE are listed below:
----|----10---|----20---|----30
chair,,table
chair,couch,table
The following SAS program is submitted:
data stock;
infile 'furniture' dsd;
input item1 $ item2 $ item3 $;
run;
Which one of the following is the value of the variable named ITEM2 in the first observation of the output
data set?
A. table
B. ,table
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: D
SASInstitute A00-201덤프 A00-201
NO.20 The following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201 A00-201 A00-201 dump A00-201 dumps
ITexamdump의 MB5-854덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TFIN52_64시험에 대비한 고품질 덤프와 VCP-510시험 최신버전덤프를 제공해드립니다. 최고품질 MB3-701시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기