Foundry Network 자격증 FN0-100 시험문제와 답

Foundry Network인증 FN0-100시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. Foundry Network인증 FN0-100시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의Foundry Network인증 FN0-100덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의Foundry Network인증 FN0-100덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.

우리 ITExamDump사이트에서 제공되는Foundry Network인증FN0-100시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Foundry Network인증FN0-100시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.

Foundry Network인증 FN0-100시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Foundry Network인증 FN0-100시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는Foundry Network 인증FN0-100시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.

Foundry Network 인증FN0-100인증시험공부자료는ITExamDump에서 제공해드리는Foundry Network 인증FN0-100덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.

시험 번호/코드: FN0-100
시험 이름: Foundry Network (Foundry Networks CNE)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 82 문항
업데이트: 2013-10-13

FN0-100 덤프무료샘플다운로드하기: http://www.itexamdump.com/FN0-100.html

NO.1 Which broadcast and pruning multicast protocol delivers IP multicast data to its
intended receivers? (Select all that apply)
A. PIM
B. ICMP
C. DVMRP
D. IGMP
Answer: A, C

Foundry Network dump   FN0-100   FN0-100   FN0-100기출문제

NO.2 Which Foundry SLB predictor uses a percentage distribution?
A. round robin
B. weighted
C. least connections
D. delay
Answer: B

Foundry Network   FN0-100덤프   FN0-100 dumps

NO.3 Which routing protocol is used on the Internet to route traffic between Autonomous
Systems and to maintain loop-free routing?
A. OSPF
B. IBGP
C. BGP4
D. RIP
Answer: C

Foundry Network   FN0-100   FN0-100   FN0-100   FN0-100덤프

NO.4 What does a Foundry ACL ID identify?
A. An ACL as standard or extended
B. Number of entries.
C. A collection of individual ACL entries
Answer: C

Foundry Network인증   FN0-100기출문제   FN0-100 dump

NO.5 What is the maximum hop count allowed by RIP?
A. 15
B. 10
C. 255
D. no limit
Answer: A

Foundry Network   FN0-100 dump   FN0-100자료

NO.6 What feature allows a switch to detect and switch web traffic to a local cache server
within the network?
A. http header hashing
B. SSL session ID switching
C. transparent cache switching
D. cache route optimization
Answer: C

Foundry Network   FN0-100   FN0-100자격증   FN0-100 dump   FN0-100

NO.7 Which Foundry CLI command should be used to add an unencrypted community
string?
A. snmp-server community private rw
B. snmp-server community 0 private rw
C. snmp-server community 1 private rw
D. snmp-server community clr private rw
Answer: B

Foundry Network   FN0-100 dumps   FN0-100최신덤프   FN0-100최신덤프   FN0-100

NO.8 What transport layer protocol provides a connection oriented service?
A. UDP
B. STP
C. TCP
D. ARP
Answer: C

Foundry Network기출문제   FN0-100   FN0-100   FN0-100   FN0-100

NO.9 An OSPF interface configured to be passive will perform which of the following?
A. send and receive OSPF updates
B. receive but not forward OSPF updates
C. will not send or receive OSPF updates
D. will not receive but forward OSPF updates
Answer: C

Foundry Network   FN0-100   FN0-100자료   FN0-100 dumps

NO.10 Which Foundry CLI command is used to provide privileged user mode?
A. access
B. enable
C. super-user
D. config t
Answer: B

Foundry Network   FN0-100덤프   FN0-100   FN0-100   FN0-100자료

NO.11 Foundry trunking groups on L3 routers load share based on destination IP/IPX
address.
A. T
B. F
Answer: A

Foundry Network   FN0-100   FN0-100 dumps   FN0-100시험문제   FN0-100인증

NO.12 What is the difference between TACACS+ and TACACS?
A. TACACS is an enhancement to TACACS+
B. TACACS is TCP based and TACACS+ is UDP based
C. TACACS+ provides encryption and uses TCP.
Answer: C

Foundry Network자격증   FN0-100   FN0-100덤프   FN0-100   FN0-100

NO.13 Exhibit:
The diagram shows an OSPF network with no designated router (DR) and no
backup designated router (BDR). Which of the following statements identifiy which
routers will be selected DR and BDR?
A. Router C is DR, Router B is BDR
B. Router B is DR, Router A is BDR
C. Router B is BDR, Router A is DR
D. Router A is DR, Router C is BDR
Answer: B

Foundry Network시험문제   FN0-100 pdf   FN0-100   FN0-100기출문제

NO.14 Which Foundry CLI command is used to copy the system image from the secondary
flash area to the primary?
A. copy flash primary
B. copy slot1 primary
C. copy secondary primary
D. copy flash flash primary
Answer: D

Foundry Network dump   FN0-100인증   FN0-100   FN0-100 dump   FN0-100시험문제   FN0-100

NO.15 The show configuration command on a Foundry device will show the running
config.
A. T
B. F
Answer: B

Foundry Network dumps   FN0-100시험문제   FN0-100   FN0-100자료

NO.16 Which of the following are true regarding the highest priority queue on Foundry
chassis devices?
A. qosp0 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
B. qosp0 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
C. qosp3 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
D. qosp3 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
Answer: D

Foundry Network dump   FN0-100   FN0-100 pdf   FN0-100   FN0-100   FN0-100최신덤프

NO.17 Which STP bridge parameter manages the interval a bridge will wait for receipt of
a hello packet before initiating a topology change?
A. priority
B. forward delay
C. maximum age
D. hello time
Answer: C

Foundry Network dump   FN0-100   FN0-100   FN0-100덤프   FN0-100

NO.18 Foundry route health injection feature supports health checks for which of the
following?
A. All TCP traffic
B. All TCP and UDP traffic
C. HTTP only
D. HTTP, POP3, and SNMP
Answer: C

Foundry Network pdf   FN0-100   FN0-100   FN0-100   FN0-100최신덤프

NO.19 The appletalk echo protocol (AEP) is equivalent to which IP protocol?
A. UDP
B. TCP
C. ARP
D. ICMP
Answer: D

Foundry Network   FN0-100   FN0-100자료   FN0-100   FN0-100

NO.20 Which of the following commands will correctly configure a Foundry Layer 3
Switch to learn routes from all neighbors except 192.168.1.170?
A. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
B. BigIron(config-rip-router)# neighbor 1024 permit any BigIron(config-rip-router)#
neighbor 2 deny 192.168.1.170
C. BigIron(config-rip-router)# neighbor deny 192.168.1.170 BigIron(config-rip-router)#
neighbor 1024 permit any
D. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
BigIron(config-rip-router)# neighbor 1024 permit any
Answer: D

Foundry Network   FN0-100시험문제   FN0-100최신덤프   FN0-100 dump   FN0-100

ITexamdump의 312-50v8덤프의 VCE테스트프로그램과 1Y0-A19덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-155시험에 대비한 고품질 덤프와 98-372시험 최신버전덤프를 제공해드립니다. 최고품질 C_TFIN52_66시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/FN0-100.html