Microsoft 인증 070-683시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
여러분은Microsoft 070-683인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증070-683시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Microsoft인증070-683시험을 패스하도록 하겠습니다. 만약Microsoft인증070-683시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
일반적으로Microsoft인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면Microsoft관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
시험 번호/코드: 070-683
시험 이름: Microsoft (TS: Windows 7, Preinstalling for OEMs )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 87 문항
업데이트: 2013-11-04
070-683 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-683.html
NO.1 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B
Microsoft 070-683 070-683 070-683자료 070-683
NO.2 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C
Microsoft dumps 070-683 pdf 070-683덤프 070-683자료 070-683 070-683시험문제
NO.3 You have Windows Image (WIM) file that contains an image of Windows 7. You plan to deploy the
image to computers that have a third-party hardware component. The device driver for the hardware
component can only be installed by using an executable provided by the hardware vendor. You need to
ensure that the device driver is installed when you deploy the image. What should you do first?
A.On a reference computer, run Drvload.exe.
B.On a reference computer, run Imagex.exe and specify the /apply parameter.
C.On a technicians computer, run Imagex.exe and specify the /mount parameter.
D.On a technicians computer, run Dism.exe and specify the /add-driver parameter.
Answer: B
Microsoft 070-683 070-683덤프 070-683인증 070-683 dump
NO.4 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C
Microsoft 070-683 070-683최신덤프 070-683 070-683인증
NO.5 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D
Microsoft 070-683 070-683 070-683 dump
NO.6 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D
Microsoft 070-683 070-683 pdf
NO.7 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D
Microsoft 070-683덤프 070-683 pdf 070-683인증
NO.8 You have a Windows Image (WIM) file named Image.wim that contains a Windows 7 image. The
default compression settings were used when creating the WIM file. You create a new image. You need to
ensure that both images are stored by using maximum compression. What should you do?
A.Append the new image to Image.wim.
B.Export the existing image, and then append the new image to Image.wim.
C.Run Compact.exe and specify the /c parameter. Run Dism.exe and specify the /remount-WIM
parameter.
D.Run Imagex.exe and specify the /mountrw parameter. Run Dism.exe and specify the /cleanup-WIM
parameter.
Answer: B
Microsoft dump 070-683 070-683 070-683 070-683덤프
NO.9 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B
Microsoft 070-683 070-683 pdf 070-683자료 070-683
NO.10 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B
Microsoft 070-683 dumps 070-683기출문제 070-683 070-683 070-683최신덤프
ITexamdump의 200-101덤프의 VCE테스트프로그램과 000-273덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-224시험에 대비한 고품질 덤프와 200-120시험 최신버전덤프를 제공해드립니다. 최고품질 000-123시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기