Microsoft MB7-514인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.Microsoft MB7-514인증시험에 대한 열기는 식지 않습니다.Microsoft MB7-514자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.
아직도 Microsoft인증MB7-514시험준비를 어떻게 해야 할지 망설이고 계시나요? 고객님의 IT인증시험준비길에는 언제나 ITExamDump가 곁을 지켜주고 있습니다. ITExamDump시험공부자료를 선택하시면 자격증취득의 소원이 이루어집니다. Microsoft인증MB7-514시험덤프는ITExamDump가 최고의 선택입니다.
만약 여러분은Microsoft MB7-514인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만Microsoft MB7-514패스는 쉬운 일은 아닙니다.Microsoft MB7-514패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
시험 번호/코드: MB7-514
시험 이름: Microsoft (NAV 5.0 C/SIDE Introduction)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-02-27
IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Microsoft인증 MB7-514시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. ITExamDump의Microsoft인증 MB7-514덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고ITExamDump제품으로 한번 가보세요.
목표가 있다면 목표를 향해 끊임없이 달려야 멋진 인생이 됩니다. 지금의 현황에 만족하여 아무런 노력도 하지 않는다면 언젠가는 치열한 경쟁을 이겨내지 못하게 될것입니다. IT업종에 종사중이시라면 다른분들이 모두 취득하는 자격증쯤은 마련해야 되지 않겠습니까? Microsoft인증 MB7-514시험은 요즘 가장 인기있는 자격증 시험의 한과목입니다. IT업계에서 살아남으려면ITExamDump에서Microsoft인증 MB7-514덤프를 마련하여 자격증에 도전하여 자기의 자리를 찾아보세요.
MB7-514 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB7-514.html
NO.1 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.2 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft자격증 MB7-514 MB7-514
NO.3 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft자격증 MB7-514 MB7-514
NO.4 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.5 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft자격증 MB7-514 MB7-514
NO.6 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.7 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft자격증 MB7-514 MB7-514
NO.8 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft자격증 MB7-514 MB7-514
NO.9 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft자격증 MB7-514 MB7-514
NO.10 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.11 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.12 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.13 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft자격증 MB7-514 MB7-514
NO.14 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.15 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.16 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft자격증 MB7-514 MB7-514
NO.17 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft자격증 MB7-514 MB7-514
NO.18 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft자격증 MB7-514 MB7-514
NO.19 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft자격증 MB7-514 MB7-514
NO.20 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft자격증 MB7-514 MB7-514
ITexamdump의 000-052덤프의 VCE테스트프로그램과 C_FSUTIL_60덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 700-302시험에 대비한 고품질 덤프와 70-484시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-Z25시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기