ITExamDump의 SAP인증 C_TBIT44_71덤프를 선택하여SAP인증 C_TBIT44_71시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고SAP인증 C_TBIT44_71시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. SAP인증 C_TBIT44_71덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
우리ITExamDump의 덤프는 여러분이SAP C_TBIT44_71인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는SAP C_TBIT44_71인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한SAP C_TBIT44_71시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,SAP C_TBIT44_71인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,
ITExamDump는SAP C_TBIT44_71시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의SAP C_TBIT44_71시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는SAP C_TBIT44_71시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
ITExamDump를 선택함으로, ITExamDump는 여러분SAP인증C_TBIT44_71시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.
시험 번호/코드: C_TBIT44_71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-02-20
SAP인증 C_TBIT44_71시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. SAP인증 C_TBIT44_71시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의SAP인증 C_TBIT44_71덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의SAP인증 C_TBIT44_71덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.
C_TBIT44_71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TBIT44_71.html
NO.1 You can create multiple configurations for one Integration Process without changing the appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP C_TBIT44_71 C_TBIT44_71인증 C_TBIT44_71
NO.2 A special aspect in B2B business processes is that the business partners involved in these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP dump C_TBIT44_71기출문제 C_TBIT44_71
NO.3 If a system error occurs in a send step, an alert can be triggered for Alert Management and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
SAP덤프 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71
NO.4 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP C_TBIT44_71 C_TBIT44_71 C_TBIT44_71기출문제 C_TBIT44_71자격증
NO.5 The communication between the Integration Server and the backend applications can be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP C_TBIT44_71인증 C_TBIT44_71자료
NO.6 The PI Mail adapter is used to send and receive emails. Which protocols are supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP C_TBIT44_71 C_TBIT44_71 dump C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 dumps
NO.7 You configure the sender RFC adapter to convert RFC calls from a sender to XML messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP C_TBIT44_71 C_TBIT44_71
NO.8 To react to situations where it is not possible or not advisable to continue a process in the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP인증 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71자격증
NO.9 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP dump C_TBIT44_71 C_TBIT44_71자격증
NO.10 You have implemented a scenario where IDocs are posted to an ERP system using the receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C_TBIT44_71 C_TBIT44_71 C_TBIT44_71자료
NO.11 Which statements are correct when using the Receiver File adapter to process XML messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP시험문제 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71
NO.12 You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration Server client.
Answer: A,B,D
SAP C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 dumps C_TBIT44_71
NO.13 For the delivery mode of an integration process, you can choose between inbound processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step available to receive
an incoming message, the message is buffered in a separate, process-instance-specific queue.
Answer: B,C,D
SAP C_TBIT44_71 C_TBIT44_71 dumps C_TBIT44_71 C_TBIT44_71 dumps
NO.14 Assume that your customer has a scenario in which a database table needs to be queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
SAP C_TBIT44_71인증 C_TBIT44_71 C_TBIT44_71덤프 C_TBIT44_71
NO.15 You have created a deadline branch. When the deadline has expired, the integration process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
SAP C_TBIT44_71 pdf C_TBIT44_71 C_TBIT44_71 dumps
ITexamdump의 646-365덤프의 VCE테스트프로그램과 74-344덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J67시험에 대비한 고품질 덤프와 JK0-U31시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기