EMC 인증한 E20-805 덤프

ITExamDump는E20-805시험문제가 변경되면E20-805덤프업데이트를 시도합니다. 업데이트가능하면 바로 업데이트하여 업데이트된 최신버전을 무료로 제공해드리는데 시간은 1년동안입니다. E20-805시험을 패스하여 자격증을 취득하고 싶은 분들은ITExamDump제품을 추천해드립니다.온라인서비스를 찾아주시면 할인해드릴게요.

우리 ITExamDump 에는 최신의EMC E20-805학습가이드가 있습니다. ITExamDump의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의EMC E20-805합습자료로EMC E20-805인증시험을 응시하실 수 있습니다.EMC E20-805인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리ITExamDump의EMC E20-805자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리ITExamDump의 제품의 중요함과 정확함을 증명하였습니다.

ITExamDump 에서 제공해드리는 EMC인증E20-805시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. EMC인증E20-805시험은ITExamDump 표EMC인증E20-805덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

모두 아시다시피EMC E20-805인증시험은 업계여서도 아주 큰 비중을 차지할만큼 큰 시험입니다. 하지만 문제는 어덯게 이 시험을 패스할것이냐이죠.EMC E20-805인증시험패스하기는 너무 힘들기 때문입니다. 다른사이트에 있는 자료들도 솔직히 모두 정확성이 떨어지는건 사실입니다. 하지만 우리ITExamDump의 문제와 답은 IT인증시험준비중인 모든분들한테 필요한 자료를 제공할수 있습니디. 그리고 중요한건 우리의 문제와 답으로 여러분은 한번에 시험을 패스하실수 있습니다.

시험 번호/코드: E20-805

시험 이름: EMC (EMC Storage and Information Infrastructure Expert Exam for Techno)

ITExamDump에는 전문적인 업계인사들이EMC E20-805시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.EMC E20-805자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.

ITExamDump의 EMC인증 E20-805덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.EMC인증 E20-805시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

ITExamDump의 EMC인증 E20-805덤프를 선택하여EMC인증 E20-805시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고EMC인증 E20-805시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. EMC인증 E20-805덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.

E20-805 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-805.html

NO.1 Click the calculator icon in the upper left corner of the screen.
According to EMC best practices, what is the minimum number of RAID 1 protected 15,000 rpm spindles
needed (155 IOPS) to support the performance profile of the Microsoft Exchange database volumes?
A. 8
B. 12
C. 14
D. 18
Answer: D

EMC자격증   E20-805   E20-805기출문제

NO.2 How would you justify the use of CLARiiON splitters in your design.?
A. To avoid an excessive number of ITLs created on the SANTap splitter
B. To take advantage of the VMware vCenter integration for protected virtual machines
C. To minimize the required hardware purchases if SANTap was used for all splitting
D. To separate the splitter load to reduce the expected high load on the WAN link
Answer: A

EMC   E20-805   E20-805   E20-805   E20-805최신덤프

NO.3 A new VMware customer would like to understand RecoverPoint s additional DR protection levels for
their virtual machines.
What design alterations should you propose?
A. Set up the ESX servers by using a CLR protection method and VMware s SRM functionality for
automated DR response.
B. Implement VMware SRM with the existing CDP configuration to provide automated local recovery.
C. Implement RecoverPoint CDP protection and augment the CDP copy with CLARiiON SnapView
technology.
D. Implement VMware fault tolerance on each VM between the two sites.
Answer: A

EMC덤프   E20-805 dump   E20-805   E20-805   E20-805
Topic 2, Scenario 21
Refer to the Exhibit.
A customer is migrating from their present DAS solution to a new VNX array. As part of the migration, you
have been tasked with sizing the Microsoft Exchange 2010 environment, specifically sizing the
appropriate IOPS profile for the Exchange mailbox servers.
The customer has profiled the environment and provided you with the data in the exhibit. Each mailbox
store contains 100-120 heavy profile users, and each server has 10-12 mailbox stores. Mailbox limits
have been put in place at 500 MB per mailbox. Deleted item retention has been left at default values.

NO.4 Which utility should you recommend to the customer to assist in migrating to the proposed
infrastructure?
A. VMware vCenter Converter
B. VMware Storage vMotion
C. SAN Copy
D. VMware vMotion
Answer: A

EMC   E20-805   E20-805덤프

NO.5 Your customer has an RPO of five hours for accounts receivables during the business hours of 8 a.m.
to 6 p.m. The customer's requirement is that a tape copy of a SQL level backup be made to match each
five-hour RPO mark. The creation of the SQL level tape copy must not compromise production server
performance.
To achieve these goals, Step 1 is to use Replication Manager (RM) to create a snapshot at noon and at 5
p.m.
What other steps are required?
A. Step 2 - Mount the snap to the mount server Step 3 - Activate the database Step 4 - Perform a
SQL-level backup
B. Step 2 - Mount the snap to the same server Step 3 - Activate the database Step 4 - Perform a
SQL-level backup
C. Step 2 - Mount the snap to the mount server Step 3 - Perform backup of the SQL directories
D. Step 2 - Mount the snap to the same server Step 3 - Perform backup of the SQL directories
Answer: A

EMC pdf   E20-805 pdf   E20-805덤프
Topic 4, Scenario 15
A midsized company wants to implement a highly integrated IT infrastructure including storage, network,
compute, and management software resources.
The IT executives think they spend too much time and effort today building, testing, and optimizing
individual components in their infrastructure. They hope to consolidate their existing server-based VDI
environment with 950 desktops, 1000 Microsoft Exchange mailboxes, and homegrown Linuxbased
applications onto a virtualized infrastructure. The goal is to reduce the current costs of their aging best of
breed
HP, Juniper, Brocade, NetApp, and CLARiiON infrastructure.
The company wants the solution to have the following capabilities:
-Built-in high availability and redundancy
-Offsite disaster recovery with automated failover
-Architectural predictability
-Optimized storage, compute, and network
-Predictable and efficient power and cooling usage
-Calculable VM scaling
-Ease of deployment and use
-Rapid provisioning capabilities
-Simplified management
You have recommended implementing cloud services using Vblock architecture.

NO.6 Which disaster recovery solution would best fit the customer s needs for the VMFS datastores?
A. RecoverPoint/SE and VMware Site Recovery Manager
B. Replicator with VMware Site Recovery Manager
C. SRDF with VMware Site Recovery Manager
D. MirrorView/A with VMware Site Recovery Manager
Answer: A

EMC dumps   E20-805   E20-805   E20-805

NO.7 How can you leverage the Replication Manager (RM) infrastructure to securely provide copies of
production SQL data to the software development team?
A. Add members from the development team to the RM user list. Through RM, provide these users with
access only to specific SQL LUNs. Allow them to schedule their own replications.
B. Add members from the development team to the RM user list. Allow them to schedule their own
replications.
C. Add members from the development team to the RM user list. Through RM, provide these users with
access only to specific SQL LUNs. Allow them to create their own replication jobs.
D. Add members from the development team to the RM user list. Allow them to create their own
replication jobs.
Answer: A

EMC   E20-805   E20-805인증   E20-805최신덤프   E20-805

NO.8 Topic 1, Scenario 27
Refer to the Exhibit.
A financial institution is implementing a disaster recovery (DR) solution for their key Oracle databases and
other critical data. RecoverPoint has been chosen as the replication technology to use for the DR solution.
For maximum protection, the replication uses CLR for all Oracle systems; CRR is used for all other data.
The production site uses Sun servers for the Oracle servers and Microsoft Windows Server 2008 hosts for
all other data repositories. Storage arrays for the Oracle servers are Symmetrix arrays. All other data and
business departments store their data on CLARiiON CX4 arrays.
Recently, the human resources and finance departments were migrated to the DMX to enhance security
and performance requirements.
This company also plans to bring in a new acquisition with AIX and VMware servers in the next six months.
The AIX servers will be placed on DMX storage and the VMware servers will be placed on CLARiiON
storage. Both are slated for CDP protection.
The DR site is located 2,500 km away from the production site. A dedicated T3 WAN link runs at 44 Mb/s.
Management and replication traffic will use separate VLANs. Each site contains eight RecoverPoint
appliances (RPAs) to maximize the performance and fault-tolerance business requirements. SANTap is
used for all Oracle splitting, and CX splitters are used for all other data.
To support the actual replication needs, 12 group sets were created to support the consistency within the
Oracle consistency groups. The policies on these sets include an RPO of 15 minutes.
The remainder of the data uses 54 consistency groups with an RPO of two hours.
1.What should be done to improve the performance of the WAN link for replication?
A. Enable QoS for the VLAN with RecoverPoint traffic
B. Set the link speed on the RPA to "max throughput"
C. Enable QoS on the Oracle consistency groups
D. Configure EtherChannel Link Aggregation for use with the WAN link
Answer: A

EMC   E20-805   E20-805자격증

NO.9 You have been asked to design a long-distance replication solution with MirrorView/S. You want to
simulate this Exchange environment and gather the baseline 200 km performance data and additional
simul-ations to perform failover testing.
Which tool should you use?
A. loadgen
B. loadsim
C. EPA
D. JetStress
Answer: A

EMC   E20-805   E20-805   E20-805 dumps

NO.10 You have planned to implement Replication Manager in this environment to manage the backup
requirements.
According to EMC best practices, what prerequisite should you consider?
A. Circular logging must be disabled.
B. Circular logging must be enabled.
C. Transaction logs and database files must be located on the same volume.
D. "Transaction Log location:" and System path location:" for each storage group must be different
Answer: A

EMC   E20-805기출문제   E20-805 dump   E20-805
Topic 3, Scenario 13
Refer to the Exhibit.
Your customer s SQL Server environment uses native SQL backup including more granular backups such
as differential backup, as well as transaction logs, to enhance the recovery solution built into the SQL
Server.
This customer also has a software development team that currently updates the development SQL
databases from the nightly production backups. All SQL environments are hosted on VNX iSCSI LUNs.
You propose creating replicas using VNX snaps, as shown in the exhibit. Your proposal includes the
implementation of Replication Manager in this environment.

NO.11 Which tool helps in analyzing the Exchange environment and provides reports on how the environment
compares with current best practices in deploying the Exchange environment?
A. ExBPA
B. Microsoft Windows Performance Monitor
C. loadsim
D. System Attendant
Answer: A

EMC자격증   E20-805   E20-805   E20-805

NO.12 The customer wants to create application-consistent copies of Exchange 2010 and SharePoint 2007
data in a CLR configuration.
What RecoverPoint features would help the customer meet this requirement?
A. KVSS and VDI integration utilities
B. KVSS and Oracle integration utilities
C. SQLSNAP and VDI integration utilities
D. SQLSNAP and TimeFinder integration utilities
Answer: A

EMC   E20-805   E20-805자료   E20-805

NO.13 Which Vblock offering is most appropriate in this scenario?
A. Vblock 0
B. Vblock 1
C. Vblock 1U
D. Vblock 2
Answer: C

EMC시험문제   E20-805   E20-805   E20-805   E20-805기출문제

NO.14 What should be done to throttle the amount of data being sent over the T3 line when new servers are
brought under RecoverPoint control?
A. Use the compression slider settings for best compression within the cluster
B. Use the balance_load CLI commands to distribute the CGs across the RPAs in the cluster evenly
C. Use the compression slider settings for best performance within the cluster
D. Use a combination of Distributed Consistency Group and bandwidth limits on the Oracle CGs in the
cluster
Answer: A

EMC   E20-805인증   E20-805

NO.15 The Security Operations team would like a way to quickly mitigate security vulnerabilities that are
reported by networking equipment vendors.
Which solution should be used to identify hospital equipment that is affected by these vulnerabilities?
A. EMC Ionix Network Configuration Manager Network Advisor
B. EMC Ionix Network Configuration Manager Report Advisor
C. RSA enVision
D. Application Discovery Manager
Answer: A

EMC dump   E20-805   E20-805기출문제

NO.16 As part of a legal discovery request, the customer must make available a functioning copy of the SQL
environment as it existed at the time of the TLog3 backups. What would be the most efficient way to
restore the SQL server to that point to make the data available?
A. 1 - Use RM to restore the data to the replica created just before TLog3 backups were completed 2 -
Roll SQL forward by applying TLog3 backups
B. 1 - Restore the Monday SQL Server backup 2 - Apply the Tuesday SQL differential backup 3 - Roll SQL
forward by applying TLog3 backups
C. 1 - Use RM to restore the data to the replica created just after TLog3 backups were completed 2 - Roll
SQL backward by subtracting TLog4 backups
D. 1 - Use RM to restore the data to the replica created just after TLog2 backups were completed 2 - Roll
SQL forward by applying TLog3 backups
Answer: A

EMC   E20-805   E20-805

NO.17 What would you recommend to help ease the workload on the customer s support staff?
A. Provide Remote Operations Services
B. Upgrade the Advanced Management Pod (AMP) to an HA AMP
C. Implement an IP aggregation solution
D. Implement Vblock Traffic Planes
Answer: A

EMC dump   E20-805   E20-805최신덤프
Topic 5, Scenario 17
Refer to the Exhibit.
A small hospital has a three-tier web application that manages the disbursement of medicine to patients.
Key steps in the process include:
-A doctor at the hospital prescribes medicines to a patient using a handheld device.
-The handheld device connects to the prescription application server through a secure connection
-The application authenticates the doctor's credentials.
-A database records the patient number, doctor's name, and prescribed medicine and dose.
-The prescription order is crosschecked with the patient s history. (That history is entered into a separate
application and database when the patient is admitted to the hospital.)
-If no problems are detected, the order is sent as an email to the hospital pharmacy.
-The pharmacy dispenses the medicine, and prints a label that is crosschecked by the nurse before the
medicine is administered to the patient.
This application, and all applications with which it communicates, must always be available so that
medicine can be given to patients. This means that any problems with the hospital network, application
servers, database servers, or storage arrays must be identified and resolved immediately.

NO.18 After three months of operations, the Monday SQL full backup is consistently running longer than the
defined backup window. For compliance purposes a tape backup must be created every Monday.
What would be the most secure way to meet the backup window with the least impact to existing
processes?
A. Change the schedule of the baseline snapshot to run before the Monday SQL full backup. Create the
tape copy from the baseline snapshot.
B. Change the Monday SQL full backup to a differential backup. Copy the differential backup to tape. Run
a SQL full backup only once a month.
C. Change the Monday SQL full backup to back up to a new CIFS share in the VNX. Use NDMP to create
a tape copy from the CIFS share.
D. Change the drive count to increase the aggregate performance of the database so that the Monday
SQL full backup runs faster.
Answer: A

EMC   E20-805최신덤프   E20-805 pdf   E20-805

NO.19 Performance is a major factor in the deployment for the customer. The customer also mentions the
need for a backup solution that minimizes the impact to production. Furthermore, the customer wants
frequent datastore checks to validate integrity.
Which solution supports the customer's goals?
A. Use Replication Manager VSS integration and a VNX clone to create a copy of the production
LUN.
Perform regular database checks against the copy.
B. Use Replication Manager and VNX Snap to create a space-efficient copy.
Perform regular database checks using eseutil.
C. Use NetWorker PowerSnap to create a VNX clone.
Perform regular database checks with eseutil.
D. Use NetWorker PowerSnap to create a space-efficient copy with VNX Snap.
Perform regular database checks with eseutil.
Answer: A

EMC   E20-805   E20-805   E20-805

NO.20 How will this solution enable the customer to meet their cost savings objectives?
A. The new infrastructure will dramatically reduce implementation, testing and management efforts.
B. The new infrastructure will provide a centralized, multitenant logical architecture.
C. vStorage APIs will offload work from the hosts, allowing the hosts to scale more efficiently.
D. The highly available architecture with automated remote replication will reduce the frequency and cost
of downtime.
Answer: A

EMC시험문제   E20-805덤프   E20-805   E20-805자격증   E20-805자격증

EMC인증 E20-805시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 EMC인증 E20-805덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. EMC 인증E20-805시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는EMC 인증E20-805시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.